[1]

Poon ADY (2014) Miniaturization of Implantable Wireless Power Receiver. Implantable Bioelectronics, Weinheim, Germany: Wiley, ch. 4, pp. 45–64, March 2014.

[2]

Si P, Hu AP, Hsu JW, Chiang M, Wang Y, Malpas S and Budgett D (2007) Wireless power supply for implantable biomedical device based on primary input voltage regulation, in 2nd IEEE ICIEA, 2007, pp. 235–239.

[3]

Badr BM, Somogyi-Gsizmazia R, Delaney KR and Dechev N (2015) Wireless power transfer for telemetric devices with variable orientation, for small rodent behavior monitoring. IEEE Sensors Journal 15, 2144–2156.

doi: 10.1109/JSEN.2014.2363836
[4]

Badr BM, Somogyi-Csizmazia R, Delaney KR and Dechev N. Maximizing wireless power transfer using ferrite rods within telemetric devices for rodents, in COMSOL Conference, Boston, USA, Oct. 7–9.

[5]

Badr BM, Somogyi-Csizmazia R, Dechev N and Delaney KR (2014) Power transfer via magnetic resonant coupling for implantable mice telemetry device, in Proc.IEEE WPTC, Jeju, South Korea, May 8–9, pp. 259–264.

[6]

DeMichele GA and Troyk PR (2003) Integrated multi-channel wireless biotelemetry system, in 25th IEEE EMBS, pp. 3372–3375.

[7]

McCormick D, Hu AP, Nielsen P, Malpas S and Budgett D (2007) Powering implantable telemetry devices from localized magnetic fields, in IEEE EMBS, pp. 2331–2335.

[8]

Wang C-S, Stielau OH and Covic GA (2000) Load models and their application in the design of loosely coupled inductive power transfer systems, in IEEE PowerCon Conference, pp. 1053–1058.

[9]

Cannon BL, Hoburg JF, Stancil DD and Goldstein SC (2015) Magnetic resonant coupling as a potential means for wireless power transfer to multiple small receivers. IEEE Transactions on Power Electronics 24, 1819– 1825.

[10]

Badr BM (2016) Wireless Power Transfer for Implantable Biomedical Devices Using Adjustable Magnetic Resonance (Ph. D. dissertation). Department of Mechanical Engineering, University of Victoria, BC, Canada.

[11]

Wireless Battery Charging, (2019, Jan. 16). [Online]. Available at www.st.com.

[12]

Exploring the evolution and optimization of wireless power transfer, (2019, Jan. 16). [Online]. Available at www.ti.com.

[13]

Dissanayake TD, Budgett DM, Hu P, Bennet L, Payner S, Booth L, Amirapu S, Wu Y and Malpas SC (2010) A novel low temperature transcutaneous energy transfer system suitable for high power implantable medical devices: performance and validation in sheep. Artificial Organs 34, 160–167.

[14]

Ng DC, Bai S, Yang J, Tran N and Skafida E (2005) Wireless technologies for closed-loop retinal prostheses. Journal of Neural Engineering 6, 1–10.

[15]

Brusamarello VJ, Blauth YB, Azambuja RD, Muller I and Sousa FRD (2013) Power transfer with an inductive link and wireless tuning. IEEE Transactions on and Instrumentation and Measurement 62, 924–931.

doi: 10.1109/TIM.2013.2245041
[16]

Si P, Hu AP, Malpas S and Budgett D (2008) A frequency control method for regulating wireless power to implantable devices. IEEE Transactions on Biomedical Circuits and Systems 2, 22–29.

doi: 10.1109/TBCAS.2008.918284
[17]

James J, Boys J and Covic G (2005) A variable inductor based tuning method for ICPT pickups, in 7th IEEE IPEC Conference, pp. 1142–1146.

[18]

Si P, Hu AP, Malpas S and Budgett D (2006) Switching frequency analysis of dynamically detuned ICPT power pick-ups, in IEEE PowerCon Conference, pp. 1–8.

[19]

Hsu J-UW, Hu AP and Swain A (2009) A wireless power pickup based on directional tuning control of magnetic amplifier. IEEE Transactions on Industrial Electronics 56, 2771–2781.

doi: 10.1109/TIE.2009.2020081
[20]

Hsu J-UW, Hu AP and Swain A. Fuzzy based directional tuning controller for a wireless power pick-up, in 10th IEEE TENCON Conference, 2008, pp. 1–6.

[21]

Covic GA, Boys JT and Peng JC-H (2008) Self tuning pick-ups for inductive power transfer, in Power Electronics Specialists Conference, pp. 3489–3494.

[22]

Huang C-Y, Boys JT, Covic GA and Ren S (2010) LCL pick-up circulating current controller for inductive power transfer systems, in Energy Conversion Congress and Exposition, pp. 640–646.

[23]

Hsu J-UW, Swain A and Hu AP (2001) Implicit adaptive controller for wireless power pickups, in Industrial Electronics and Applications Conference, pp. 514–519.

[24]

Hsu J-UW, Hu AP and Swain A (2012) Fuzzy logic-based directional fullrange tuning control of wireless power pickups. IET Power Electronics, 5, 773–781.

doi: 10.1049/iet-pel.2011.0364
[25]

Pantic Z (2013) Inductive Power Transfer Systems for Charging of Electric Vehicles (Ph. D. thesis). Department of Electrical Engineering, North Carolina State University, Raleigh, North Carolina.

[26]

Petersen E (2015) Variable capacitor for resonant power transfer systems. US patent number WO2014018968 A2, July 2015.

[27]

Riehl PS, Satyamoorthy A and Akram H (2014) Open-circuit impedance control of a resonant wireless power receiver for voltage limiting. US patent number WO2014052686 A2, Sep. 2014.

[28]

Yen Y-C, Riehl PS, Akram H and Satyamoorthy A (2015) Wireless power receiver with programmable power path. US patent number WO2015105924 A1, July 2015.

[29]

Fleisch D (2008) A Student's Guide to Maxwell's Equations. Cambridge, UK: Cambridge University press.

[30]

Yang Z, Liu W and Basham E (2007) Inductor modeling in wireless links for implantable electronics. IEEE Transactions on Magnetics 43, 3851–3860.

doi: 10.1109/TMAG.2007.904189
[31]

Xue R-F, Cheng K-W and Je M (2013) High-efficiency wireless power transfer for biomedical implants by optimal resonant load transformation. IEEE Transactions on Circuits and Systems Ⅰ: Regular Papers 60, 867–874.

doi: 10.1109/TCSI.2012.2209297
[32]

Application note "Comparison of ceramic and tantalum capacitors" (2015, June 16). [Online]. Available at www.Kemet.com.

[33]

Microcontroller Nordic "nRF24LE1-F16Q48, Ultra-low Power Wireless System" (2015, June 16). [Online]. Available at www.nordicsemi.com.

[34]

Wang C-S, Stielau OH and Covic GA (2005) Design considerations for a contactless electric vehicle battery charger. IEEE Transactions on Industrial Electronics 52, 1308–1314.

doi: 10.1109/TIE.2005.855672
[35]

Boys JT, Covic GA and Xu Y (2003) DC analysis technique for inductive power transfer pick-ups. IEEE Power Electronics Letters 1, 51–53.

doi: 10.1109/LPEL.2003.819909
[36]

Yu Q, Holmes TW and Naishadham K (2002) RF equivalent circuit modeling of ferrite-core inductors and characterization of core materials. IEEE Transaction on Electromagnetic Compatibility 44, 258–262.

doi: 10.1109/15.990733
[37]

Green L (2001) RF-inductor modeling for the 21st century. Designfeature, 67–74. Available at https://scholar.google.com/scholar_lookup?hl=en&publication_year=2001&pages=67-68&author=L.+Green&title=%E2%80%98RF-Inductor+Modeling+for+the+21st+Century%E2%80%99

[38]

Gate driver "MIC4421" (2019, Jan. 16). [Online]. Available at http://www.micrel.com.

[39]

MOSFET "IRF840" (2019, Jan. 16). [Online]. Available at http://www.vishay.com.

[40]

Badr BM, Somogyi-Csizmazia R, Leslie P, Delaney KR and Dechev N (2016) Design of a wireless measurement system for use in wireless power transfer applications for implants. Journal of Wireless Power Transfer 4, 21–32.

[41]

Sokal NO and Sokal AD (1975) Class E-A new class of high-efficiency tuned single-ended switching power amplifiers. IEEE Journal of Solid-State Circuits 10, 168–176.

[42]

Sokal NO and Sokal AD (1975) High-efficiency tuned switching power amplifier. USA Patent number 3, 919, 656.

[43]

Sokal NO (1981) Class E high-efficiency switching-mode tuned power amplifier with only one inductor and one capacitor in load network-approximate analysis. IEEE Journal of Solid-State Circuits 16, 380–384.