[1]

Feng H, Cai T, Duan S, Zhang X, Hu H, et al. 2018. A dual-side-detuned series–series compensated resonant converter for wide charging region in a wireless power transfer system. IEEE Transactions on Industrial Electronics 65:2177−88

doi: 10.1109/TIE.2017.2745455
[2]

Zhao J, Cai T, Duan S, Feng H, Chen C, et al. 2016. A general design method of primary compensation network for dynamic WPT system maintaining stable transmission power. IEEE Transactions on Power Electronics 31:8343−58

doi: 10.1109/TPEL.2016.2516023
[3]

Yao Y, Wang Y, Liu X, Lu K, Xu D. 2018. Analysis and design of an S/SP compensated IPT system to minimize output voltage fluctuation versus coupling coefficient and load variation. IEEE Transactions on Vehicular Technology 67:9262−72

doi: 10.1109/TVT.2018.2855682
[4]

Hou J, Chen Q, Zhang Z, Wong SC, Tse CK. 2018. Analysis of output current characteristics for higher order primary compensation in inductive power transfer systems. IEEE Transactions on Power Electronics 33:6807−21

doi: 10.1109/TPEL.2017.2755862
[5]

Feng H, Dayerizadeh A, Lukic SM. 2021. A coupling-insensitive X-type IPT system for high position tolerance. IEEE Transactions on Industrial Electronics 68:6917−26

doi: 10.1109/TIE.2020.3000116
[6]

Wu HH, Gilchrist A, Sealy KD, Bronson D. 2012. A high efficiency 5 kW inductive charger for EVs using dual side control. IEEE Transactions on Industrial Informatics 8:585−95

doi: 10.1109/tii.2012.2192283
[7]

Sample AP, Waters BH, Wisdom ST, Smith JR. 2013. Enabling seamless wireless power delivery in dynamic environments. Proceedings of the IEEE 101:1343−58

doi: 10.1109/jproc.2013.2252453
[8]

Miller JM, Onar OC, Chinthavali M. 2015. Primary-side power flow control of wireless power transfer for electric vehicle charging. IEEE Journal of Emerging and Selected Topics in Power Electronics 3:147−62

doi: 10.1109/JESTPE.2014.2382569
[9]

Chen Y, Yang B, Zhou X, Li Q, He Z, et al. 2020. A hybrid inductive power transfer system with misalignment tolerance using quadruple-D quadrature pads. IEEE Transactions on Power Electronics 35:6039−49

doi: 10.1109/tpel.2019.2954906
[10]

Zaheer A, Hao H, Covic GA, Kacprzak D. 2015. Investigation of multiple decoupled coil primary pad topologies in lumped IPT systems for interoperable electric vehicle charging. IEEE Transactions on Power Electronics 30:1937−55

doi: 10.1109/TPEL.2014.2329693
[11]

Kim S, Covic GA, Boys JT. 2017. Tripolar pad for inductive power transfer systems for EV charging. IEEE Transactions on Power Electronics 32:5045−57

doi: 10.1109/TPEL.2016.2606893
[12]

Zheng C, Ma H, Lai JS, Zhang L. 2015. Design considerations to reduce gap variation and misalignment effects for the inductive power transfer system. IEEE Transactions on Power Electronics 30:6108−19

doi: 10.1109/TPEL.2015.2424893
[13]

Li G, Ma H. 2022. A hybrid IPT system with high-misalignment tolerance and inherent CC–CV output characteristics for EVs charging applications. IEEE Journal of Emerging and Selected Topics in Power Electronics 10:3152−60

doi: 10.1109/JESTPE.2021.3112969
[14]

Budhia M, Boys JT, Covic GA, Huang CY. 2013. Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems. IEEE Transactions on Industrial Electronics 60:318−28

doi: 10.1109/TIE.2011.2179274
[15]

Li Y, Lin T, Mai R, Huang L, He Z. 2018. Compact double-sided decoupled coils-based WPT systems for high-power applications: analysis, design, and experimental verification. IEEE Transactions on Transportation Electrification 4:64−75

doi: 10.1109/TTE.2017.2745681
[16]

Fu M, Ma C, Zhu X. 2014. A cascaded boost–buck converter for high-efficiency wireless power transfer systems. IEEE Transactions on Industrial Informatics 10:1972−80

doi: 10.1109/TII.2013.2291682
[17]

Li H, Li J, Wang K, Chen W, Yang X. 2015. A maximum efficiency point tracking control scheme for wireless power transfer systems using magnetic resonant coupling. IEEE Transactions on Power Electronics 30:3998−4008

doi: 10.1109/TPEL.2014.2349534
[18]

Liu Y, Madawala UK, Mai R, He Z. 2020. Zero-phase-angle controlled bidirectional wireless EV charging systems for large coil misalignments. IEEE Transactions on Power Electronics 35:5343−53

doi: 10.1109/TPEL.2019.2941709
[19]

Liu Y, Madawala UK, Mai R, He Z. 2020. An optimal multivariable control strategy for inductive power transfer systems to improve efficiency. IEEE Transactions on Power Electronics 35:8998−9010

doi: 10.1109/TPEL.2020.2970780
[20]

Sample AP, Meyer DT, Smith JR. 2011. Analysis, experimental results, and range adaptation of magnetically coupled resonators for wireless power transfer. IEEE Transactions on Industrial Electronics 58:544−54

doi: 10.1109/TIE.2010.2046002
[21]

Zhang Z, Zheng S, Luo S, Xu D, Krein PT, et al. 2022. An inductive power transfer charging system with a multiband frequency tracking control for misalignment tolerance. IEEE Transactions on Power Electronics 37:11342−55

doi: 10.1109/TPEL.2022.3160497
[22]

Chen Y, He S, Yang B, Chen S, He Z, et al. 2023. Reconfigurable rectifier-based detuned series-series compensated IPT system for anti-misalignment and efficiency improvement. IEEE Transactions on Power Electronics 38:2720−29

doi: 10.1109/TPEL.2022.3204592
[23]

Li H, Liu M, Kong L, Wang Y. 2023. An independent dual-coil driving topology for wireless power transfer. IEEE Transactions on Power Electronics 38:1378−83

doi: 10.1109/TPEL.2022.3208020
[24]

Wang Y, Liu H, Wu F, Wheeler P, Zhou Q, et al. 2023. Research on a three-coil hybrid IPT charger with improved tolerance to coupling variation and load-independent output. IEEE Journal of Emerging and Selected Topics in Industrial Electronics 4:625−36

doi: 10.1109/JESTIE.2022.3231234
[25]

Yuan Z, Saeedifard M, Cai C, Yang Q, Zhang P, et al. 2022. A misalignment tolerant design for a dual-coupled LCC-S-compensated WPT system with load-independent CC output. IEEE Transactions on Power Electronics 37:7480−92

doi: 10.1109/TPEL.2022.3141453
[26]

Wu Y, Liu C, Zhou M, Mao X, Zhang Y. 2023. An antioffset electric vehicle wireless charging system based on dual coupled antiparallel coils. IEEE Transactions on Power Electronics 38:5634−37

doi: 10.1109/TPEL.2023.3238353
[27]

Chen Y, Mai R, Zhang Y, Li M, He Z. 2019. Improving misalignment tolerance for IPT system using a third-coil. IEEE Transactions on Power Electronics 34:3009−13

doi: 10.1109/TPEL.2018.2867919
[28]

Ramezani A, Farhangi S, Iman-Eini H, Farhangi B, Rahimi R, et al. 2019. Optimized LCC-series compensated resonant network for stationary wireless EV chargers. IEEE Transactions on Industrial Electronics 66:2756−65

doi: 10.1109/TIE.2018.2840502
[29]

Chen Y, Zhang H, Shin CS, Jo CH, Park SJ, et al. 2020. An efficiency optimization-based asymmetric tuning method of double-sided LCC compensated WPT system for electric vehicles. IEEE Transactions on Power Electronics 35:11475−87

doi: 10.1109/TPEL.2020.2984712
[30]

Wojda RP, Kazimierczuk MK. 2012. Winding resistance of litz-wire and multi-strand inductors. IET Power Electronics 5:257−68

doi: 10.1049/iet-pel.2010.0359