[1]

Chu WQ, Zhu ZQ, Zhang J, Liu X, Stone DA, et al. 2015. Investigation on operational envelops and efficiency maps of electrically excited machines for electrical vehicle applications. IEEE Transactions on Magnetics 51:8103510

doi: 10.1109/TMAG.2014.2359008
[2]

Wang Y, Nuzzo S, Zhang H, Zhao W, Gerada C, et al. 2020. Challenges and opportunities for wound field synchronous generators in future more electric aircraft. IEEE Transactions on Transportation Electrification 6:1466−1477

doi: 10.1109/TTE.2020.2980189
[3]

Tang J, Liu Y, Sharma N. 2019. Modeling and experimental verification of high-frequency inductive brushless exciter for electrically excited synchronous machines. IEEE Transactions on Industry Applications 55:4613−4623

doi: 10.1109/TIA.2019.2921259
[4]

Maier D, Heinrich J, Zimmer M, Maier M, Parspour N. 2016. Contribution to the system design of contactless energy transfer systems. IEEE Transactions on Industry Applications 55:316−326

doi: 10.1109/TIA.2018.2866247
[5]

Tang J, Liu Y, Lundberg S. 2021. Estimation algorithm for current and temperature of field winding in electrically excited synchronous machines with high-frequency brushless exciters. IEEE Transactions on Power Electronics 36:3512−3523

doi: 10.1109/TPEL.2020.3017139
[6]

Kang J, Liu Y, Sun L, Zhong Z, Fu M. 2021. A reduced-order model for wirelessly excited machine based on linear approximation. IEEE Transactions on Power Electronics 36:12389−12399

doi: 10.1109/TPEL.2021.3079273
[7]

Gneiting A, Müller S, Parspour N. 2023. Sensorless estimation of rotor current and rotor position for inductive electrically excited synchronous machines. 2023 IEEE International Electric Machines & Drives Conference (IEMDC), San Francisco, CA, USA, 15−18 May, 2023. USA: IEEE. pp. 1−6 doi: 10.1109/IEMDC55163.2023.10238998
[8]

Kang J, Liu Y, Sun L. 2019. A primary-side control method of wireless power transfer for motor electric excitation. 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), Xi’an, China, 19−21 June, 2019. USA: IEEE. pp. 2423−2428 doi: 10.1109/iciea.2019.8834016
[9]

Gneiting A, Burkard F, Maier D, Noeren J, Parspour N. 2024. Wireless power transfer model based estimation of rotor current and temperature for inductive electrically excited synchronous machines. 2024 IEEE Wireless Power Technology Conference and Expo (WPTCE), Kyoto, Japan, 8−11 May, 2024. USA: IEEE. pp. 404−408 doi: 10.1109/WPTCE59894.2024.10557259
[10]

Song K, Li Z, Jiang J, Zhu C. 2018. Constant current/voltage charging operation for series–series and series–parallel compensated wireless power transfer systems employing primary-side controller. IEEE Transactions on Power Electronics 33:8065−8080

doi: 10.1109/TPEL.2017.2767099
[11]

Zeng J, Li K, Yuan H, Yang Y, Tan SC, et al. 2025. A fast front-end monitoring method for mutual inductance and load movement in SS-compensated wireless power transfer systems based on harmonics extraction. IEEE Transactions on Power Electronics 40:2569−2580

doi: 10.1109/TPEL.2024.3464124
[12]

Zhang Y, Yan Z, Kan T, Liu Y, Mi CC. 2019. Modelling and analysis of the distortion of strongly-coupled wireless power transfer systems with SS and LCC–LCC compensations. IET Power Electronics 12:1321−1328

doi: 10.1049/iet-pel.2018.5542
[13]

Vulfovich A, Kolesnik S, Baimel D, Gutman M, Geftler A, et al. 2022. Output characteristics modeling and experimental verification of secondary-uncompensated inductive power delivery link operating without feedback. Energy 252:124104

doi: 10.1016/j.energy.2022.124104
[14]

Fu X, Qi Q, Tan L. 2019. Design and analysis of brushless wound field synchronous machine with electro-magnetic coupling resonators. IEEE Access 7:173636−173645

doi: 10.1109/ACCESS.2019.2957133
[15]

Sun L, Kang J, Liu Y, Mao Z, Zhong Z. 2020. Wireless power transfer based contactless excitation of electrically excited synchronous motor. 2020 IEEE 9th International Power Electronics and Motion Control Conference (IPEMC2020-ECCE Asia), Nanjing, China, November 29−December 2, 2020. USA: IEEE. pp. 1091−1097 doi: 10.1109/ipemc-ecceasia48364.2020.9368049
[16]

Zhang Y, Kan T, Yan Z, Mao Y, Wu Z, et al. 2019. Modeling and analysis of series-none compensation for wireless power transfer systems with a strong coupling. IEEE Transactions on Power Electronics 34:1209−1215

doi: 10.1109/TPEL.2018.2835307
[17]

Zhang Y, Yan Z, Liang Z, Li S, Mi CC. 2020. A high-power wireless charging system using LCL-N topology to achieve a compact and low-cost receiver. IEEE Transactions on Power Electronics 35:131−137

doi: 10.1109/TPEL.2019.2914363
[18]

Zhang Y, Shen Z, Wang H, Pan W, Wu W. 2021. Analysis and design of constant-current and constant-voltage output for LCC-N topology in wireless power transfer system. 2021 IEEE 1st International Power Electronics and Application Symposium (PEAS), Shanghai, China, 13−15 November, 2021. USA: IEEE. pp. 1−5 doi: 10.1109/peas53589.2021.9628746
[19]

Ren S, Song B, Cui S, Dong S, Shi S. 2024. A novel LC-N resonant topology for strongly coupled wireless power transfer system. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, China, 17−20 May, 2024. USA: IEEE. pp. 4617−4621 doi: 10.1109/IPEMC-ECCEAsia60879.2024.10567722
[20]

Berweiler B, Ponick B. 2020. Current and average temperature calculation for electrically excited synchronous machines in case of contactless energy supply. 2020 International Conference on Electrical Machines (ICEM), Gothenburg, Sweden, 23−26 August, 2020. USA: IEEE. pp. 1730−1735 doi: 10.1109/ICEM49940.2020.9270863
[21]

Mai J, Zeng X, Yao Y, Wang Y, Xu D. 2021. Impedance analysis and design of IPT system to improve system efficiency and reduce output voltage or current fluctuations. IEEE Transactions on Power Electronics 36:14029−14038

doi: 10.1109/TPEL.2021.3090590
[22]

Liu Z, Wang L, Guo Y, Li S. 2022. Primary-side linear control for constant current/voltage charging of the wireless power transfer system based on the LCC-N compensation topology. IEEE Transactions on Industrial Electronics 69:8895−8904

doi: 10.1109/TIE.2021.3114670
[23]

Huang J, Wong SC, Liu X, Li Z. 2019. Steady state analysis of wireless power transfer system with rectifier-load under DCM. 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), Xi’an, China, 19−21 June, 2019. USA: IEEE. pp. 462−467 doi: 10.1109/iciea.2019.8834027
[24]

Song B, Shi S, Cui S, Dong S, Zhang Q, et al. 2024. Wireless power transmission excitation systems for electrically excited motors: comparison of magnetic coupler topologies. 2024 IEEE 10th International Power Electronics and Motion Control Conference (IPEMC2024-ECCE Asia), Chengdu, China, 17−20 May, 2024. USA: IEEE. pp. 5009−5013 doi: 10.1109/IPEMC-ECCEAsia60879.2024.10567814