[1]

He W, Zou J, Wang B, Vilayurganapathy S, Zhou M, et al. 2013. Gas transport in porous electrodes of solid oxide fuel cells: a review on diffusion and diffusivity measurement. Journal of Power Sources 237:64−73

doi: 10.1016/j.jpowsour.2013.02.089
[2]

Choudhary T, Sanjay. 2017. Thermodynamic assessment of SOFC-ICGT hybrid cycle: energy analysis and entropy generation minimization. Energy 134:1013−1028

doi: 10.1016/j.energy.2017.06.064
[3]

Hassan N. 2021. Catalytic performance of nanostructured materials recently used for developing fuel cells' electrodes. International Journal of Hydrogen Energy 46:39315−39368

doi: 10.1016/j.ijhydene.2021.09.177
[4]

Singhal SC. 2000. Advances in solid oxide fuel cell technology. Solid State Ionics 135:305−313

doi: 10.1016/S0167-2738(00)00452-5
[5]

Chehrmonavari H, Kakaee A, Hosseini SE, Desideri U, Tsatsaronis G, et al. 2023. Hybridizing solid oxide fuel cells with internal combustion engines for power and propulsion systems: a review. Renewable and Sustainable Energy Reviews 171:112982

doi: 10.1016/j.rser.2022.112982
[6]

Suzuki T, Liang B, Yamaguchi T, Hamamoto K, Fujishiro Y. 2011. Development of novel micro flat-tube solid-oxide fuel cells. Electrochemistry Communications 13:719−722

doi: 10.1016/j.elecom.2011.04.019
[7]

Kong W, Zhang W, Zhang S, Zhang Q, Su S. 2016. Residual stress analysis of a micro-tubular solid oxide fuel cell. International Journal of Hydrogen Energy 41:16173−16180

doi: 10.1016/j.ijhydene.2016.05.256
[8]

Li T, Heenan TMM, Rabuni MF, Wang B, Farandos NM, et al. 2019. Design of next-generation ceramic fuel cells and real-time characterization with synchrotron X-ray diffraction computed tomography. Nature Communications 10:1497

doi: 10.1038/s41467-019-09427-z
[9]

Leah RT, Bone A, Hammer E, Selcuk A, Rahman M, et al. 2017. Development progress on the ceres power steel cell technology platform: further progress towards commercialization. ECS Transactions 78:87

doi: 10.1149/07801.0087ecst
[10]

Mukerjee S, Leah R, Selby M, Stevenson G, Brandon NP. 2017. Chapter 9 - Life and reliability of solid oxide fuel cell-based products: a review. In Solid Oxide Fuel Cell Lifetime and Reliability, eds. Brandon NP, Ruiz-Trejo E, Boldrin. UK: Academic Press. pp. 173−191 doi: 10.1016/B978-0-08-101102-7.00009-X
[11]

Mai A, Schuler JA, Fleischhauer F, Nerlich V, Schuler A. 2015. Hexis and the SOFC system Galileo 1000 N: experiences from lab and field testing. ECS Transactions 68:109

doi: 10.1149/06801.0109ecst
[12]

Mai A, Iwanschitz B, Schuler JA, Denzler R, Nerlich V, et al. 2013. Hexis' SOFC system Galileo 1000 N – lab and field test experiences. ECS Transactions 57:73

doi: 10.1149/05701.0073ecst
[13]

Cable TL, Sofie SW. 2007. A symmetrical, planar SOFC design for NASA's high specific power density requirements. Journal of Power Sources 174:221−227

doi: 10.1016/j.jpowsour.2007.08.110
[14]

Singhal SC. 2014. Solid oxide fuel cells for power generation. WIREs Energy and Environment 3:179−194

doi: 10.1002/wene.96
[15]

Han Z, Wang Y, Yang Z, Han M. 2016. Electrochemical properties of tubular SOFC based on a porous ceramic support fabricated by phase-inversion method. Journal of Materials Science & Technology 32:681−686

doi: 10.1016/j.jmst.2016.03.002
[16]

Kuterbekov KA, Nikonov AV, Bekmyrza KZ, Pavzderin NB, Kabyshev AM, et al. 2022. Classification of solid oxide fuel cells. Nanomaterials 12:1059

doi: 10.3390/nano12071059
[17]

Ab Rahman M, Othman MHD, Fansuri H, Harun Z, Omar AF, et al. 2020. Development of high-performance anode/electrolyte/cathode micro-tubular solid oxide fuel cell via phase inversion-based co-extrusion/co-sintering technique. Journal of Power Sources 467:228345

doi: 10.1016/j.jpowsour.2020.228345
[18]

Howe KS, Thompson GJ, Kendall K. 2011. Micro-tubular solid oxide fuel cells and stacks. Journal of Power Sources 196:1677−1686

doi: 10.1016/j.jpowsour.2010.09.043
[19]

Hassmann K. 2001. SOFC power plants, the Siemens-Westinghouse approach. Fuel Cells 1:78−84

doi: 10.1002/1615-6854(200105)1:1<78::AID-FUCE78>3.0.CO;2-Q
[20]

Dollard WJ. 1992. Solid oxide fuel cell developments at Westinghouse. Journal of Power Sources 37:133−139

doi: 10.1016/0378-7753(92)80070-R
[21]

Othman MHD, Wu Z, Droushiotis N, Doraswami U, Kelsall G, et al. 2010. Single-step fabrication and characterisations of electrolyte/anode dual-layer hollow fibres for micro-tubular solid oxide fuel cells. Journal of Membrane Science 351:196−204

doi: 10.1016/j.memsci.2010.01.050
[22]

Li T, Lu X, Rabuni MF, Wang B, Farandos NM, et al. 2020. High-performance fuel cell designed for coking-resistance and efficient conversion of waste methane to electrical energy. Energy & Environmental Science 13:1879−1887

doi: 10.1039/D0EE00070A
[23]

Kendall K, Minh NQ, Singhal SC. 2003. Chapter 8 – Cell and stack designs. In High Temperature and Solid Oxide Fuel Cells: Fundamentals, Design and Applications, eds. Singhal SC, Kendall K. Amsterdam: Elsevier. pp. 197−228 doi: 10.1016/B978-185617387-2/50025-8
[24]

Singhal SC. 2000. Science and technology of solid-oxide fuel cells. MRS Bulletin 25:16−21

doi: 10.1557/mrs2000.13
[25]

Behling NH. 2013. Chapter 6 - History of solid oxide fuel cells. In Fuel Cells, ed. Behling NH. Amsterdam: Elsevier. pp. 223−421 doi: 10.1016/B978-0-444-56325-5.00006-5
[26]

Kendall K. 2010. Progress in microtubular solid oxide fuel cells. International Journal of Applied Ceramic Technology 7:1−9

doi: 10.1111/j.1744-7402.2008.02350.x
[27]

Sui J, Liu J. 2007. An electrolyte-supported SOFC stack fabricated by slip casting technique. ECS Transactions 7:633

doi: 10.1149/1.2729146
[28]

Timurkutluk B, Timurkutluk C, Mat MD, Kaplan Y. 2016. A review on cell/stack designs for high performance solid oxide fuel cells. Renewable and Sustainable Energy Reviews 56:1101−1121

doi: 10.1016/j.rser.2015.12.034
[29]

Khan MZ, Iltaf A, Ishfaq HA, Khan FN, Tanveer WH, et al. 2021. Flat-tubular solid oxide fuel cells and stacks: a review. Journal of Asian Ceramic Societies 9:745−770

doi: 10.1080/21870764.2021.1920135
[30]

Lim TH, Park JL, Lee SB, Park SJ, Song RH, et al. 2010. Fabrication and operation of a 1 kW class anode-supported flat tubular SOFC stack. International Journal of Hydrogen Energy 35:9687−9692

doi: 10.1016/j.ijhydene.2010.06.052
[31]

Kim SD, Hyun SH, Moon J, Kim JH, Song RH. 2005. Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells. Journal of Power Sources 139:67−72

doi: 10.1016/j.jpowsour.2004.07.013
[32]

Park S, Sammes NM, Song KH, Kim T, Chung JS. 2017. Monolithic flat tubular types of solid oxide fuel cells with integrated electrode and gas channels. International Journal of Hydrogen Energy 42:1154−1160

doi: 10.1016/j.ijhydene.2016.08.212
[33]

Wang J, Zhao Y, Yang J, Sang J, Wu A, et al. 2023. Understanding thermal and redox cycling behaviors of flat-tube solid oxide fuel cells. International Journal of Hydrogen Energy 48:21886−21897

doi: 10.1016/j.ijhydene.2023.03.062
[34]

Yoon H, Kim T, Park S, Sammes NM, Chung JS. 2018. Stable LSM/LSTM bi-layer interconnect for flat-tubular solid oxide fuel cells. International Journal of Hydrogen Energy 43:363−372

doi: 10.1016/j.ijhydene.2017.11.024
[35]

Liu W, Zou Z, Miao F, Li X, Wang J, et al. 2019. Anode-Supported Planar Solid Oxide Fuel Cells Based on Double-sided Cathodes. Energy Technology 7:240−244

doi: 10.1002/ente.201800743
[36]

Liu W, Zheng J, Wang Y, Jiang C, Li D, et al. 2020. Structure evaluation of anode-supported planar solid oxide fuel cells based on single/double-sided electrolyte(s) under redox conditions. International Journal of Applied Ceramic Technology 17:1314−1321

doi: 10.1111/ijac.13429
[37]

Guan W, Du Z, Wang J, Jiang L, Yang J, et al. 2020. Mechanisms of performance degradation induced by thermal cycling in solid oxide fuel cell stacks with flat-tube anode-supported cells based on double-sided cathodes. International Journal of Hydrogen Energy 45:19840−19846

doi: 10.1016/j.ijhydene.2020.05.114
[38]

Yang J, Zou Z, Zhang H, Chang X, Liu W, et al. 2021. Study on the long-term discharge and redox stability of symmetric flat-tube solid oxide fuel cells. International Journal of Hydrogen Energy 46:9741−9748

doi: 10.1016/j.ijhydene.2020.12.227
[39]

Khan MZ, Song RH, Hussain A, Lee SB, Lim TH, et al. 2020. Effect of applied current density on the degradation behavior of anode-supported flat-tubular solid oxide fuel cells. Journal of the European Ceramic Society 40:1407−1417

doi: 10.1016/j.jeurceramsoc.2019.11.017
[40]

Lim TH, Kim GY, Park JL, Song RH, Lee SB, et al. 2007. Operating characteristics of advanced 500W class anode-supported flat tubular SOFC stack in KIER. ECS Transactions 7:193

doi: 10.1149/1.2729091
[41]

Ji W, Zhang L, Ming L, Jiang Y, Xie B. 2015. Design and fabrication of a 600W anode supported flat tubular SOFC stack. ECS Transactions 68:1865

doi: 10.1149/06801.1865ecst
[42]

Choi Y, Byun S, Seo DW, Hwang HJ, Kim TW, et al. 2022. New design and performance evaluation of 1 kW-class reversible solid oxide electrolysis-fuel cell stack using flat-tubular cells. Journal of Power Sources 542:231744

doi: 10.1016/j.jpowsour.2022.231744
[43]

Han B, Tang Y, Wang J, Guan W, Singhal SC. 2023. Degradation behavior under alternating constant-current/constant-voltage discharge for flat-tube solid oxide fuel cells inside stack. International Journal of Hydrogen Energy 48:17654−17663

doi: 10.1016/j.ijhydene.2023.01.253
[44]

Sui J, Liu J. 2008. Slip-cast Ce0.8Sm0.2O1.9 cone-shaped SOFC. Journal of the American Ceramic Society 91:1335−1337

doi: 10.1111/j.1551-2916.2008.02270.x
[45]

Sui J, Dong L, Liu J. 2012. Cone-shaped cylindrical Ce0.9Gd0.1O1.95 electrolyte prepared by slip casting and its application to solid oxide fuel cells. Journal of Rare Earths 30:53−56

doi: 10.1016/S1002-0721(10)60638-2
[46]

Zhang Y, Liu J, Yin J, Yuan W, Sui J. 2008. Fabrication and performance of cone-shaped segmented-in-series solid oxide fuel cells. International Journal of Applied Ceramic Technology 5:568−573

doi: 10.1111/j.1744-7402.2008.02253.x
[47]

Bai Y, Liu J, Wang C. 2009. Performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack fabricated by dip coating technique. International Journal of Hydrogen Energy 34:7311−7315

doi: 10.1016/j.ijhydene.2009.07.004
[48]

Ding J, Liu J. 2009. A novel design and performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack. Journal of Power Sources 193:769−773

doi: 10.1016/j.jpowsour.2009.04.049
[49]

Ding J, Liu J. 2008. Fabrication and Electrochemical Performance of Anode-Supported Solid Oxide Fuel Cells by a Single-Step Cosintering Process. Journal of the American Ceramic Society 91:3303−3307

doi: 10.1111/j.1551-2916.2008.02612.x
[50]

Liu Y, Tang Y, Ding J, Liu J. 2012. Electrochemical performance of cone-shaped anode-supported segmented-in-series SOFCs fabricated by gel-casting technique. International Journal of Hydrogen Energy 37:921−925

doi: 10.1016/j.ijhydene.2011.03.159
[51]

Xiao J, Liu J, Ding J. 2011. Electrochemical performance of cone-shaped tubular anode supported solid oxide fuel cells fabricated by low-pressure injection moulding technique. ECS Transactions 35:609

doi: 10.1149/1.3570039
[52]

Wang H, Liu J. 2012. Effect of anode structure on performance of cone-shaped solid oxide fuel cells fabricated by phase inversion. International Journal of Hydrogen Energy 37:4339−4345

doi: 10.1016/j.ijhydene.2011.10.126
[53]

Zhang SL, Li CX, Liu S, Li CJ, Yang GJ, et al. 2017. Thermally sprayed large tubular solid oxide fuel cells and its stack: geometry optimization, preparation, and performance. Journal of Thermal Spray Technology 26:441−455

doi: 10.1007/s11666-016-0506-5
[54]

Gardner FJ, Day MJ, Brandon NP, Pashley MN, Cassidy M. 2000. SOFC technology development at Rolls-Royce. Journal of Power Sources 86:122−129

doi: 10.1016/S0378-7753(99)00428-0
[55]

Yoshida H, Seyama T, Sobue T, Yamashita S. 2011. Development of residential SOFC CHP system with flatten tubular segmented-in-series cells stack. ECS Transactions 35:97

doi: 10.1149/1.3569983
[56]

Park BK, Kim DW, Song RH, Lee SB, Lim TH, et al. 2015. Design of a dual-layer ceramic interconnect based on perovskite oxides for segmented-in-series solid oxide fuel cells. Journal of Power Sources 300:318−324

doi: 10.1016/j.jpowsour.2015.09.082
[57]

Mushtaq U, Kim DW, Yun UJ, Lee JW, Lee SB, et al. 2015. Effect of cathode geometry on the electrochemical performance of flat tubular segmented-in-series (SIS) solid oxide fuel cell. International Journal of Hydrogen Energy 40:6207−6215

doi: 10.1016/j.ijhydene.2015.03.040
[58]

Kim DW, Yun UJ, Lee JW, Lim TH, Lee SB, et al. 2014. Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle. Energy 72:215−221

doi: 10.1016/j.energy.2014.05.026
[59]

Fujita K, Somekawa T, Horiuchi K, Matsuzaki Y. 2009. Evaluation of the redox stability of segmented-in-series solid oxide fuel cell stacks. Journal of Power Sources 193:130−135

doi: 10.1016/j.jpowsour.2008.11.091
[60]

Fujita K, Somekawa T, Hatae T, Matsuzaki Y. 2011. Residual stress and redox cycling of segmented-in-series solid oxide fuel cells. Journal of Power Sources 196:9022−9026

doi: 10.1016/j.jpowsour.2011.01.022
[61]

An YT, Ji MJ, Hwang HJ, Choi BH. 2015. Fabrication of a flat tubular segmented-in-series solid oxide fuel cell using decalcomania paper. Fuel Cells 15:566−570

doi: 10.1002/fuce.201300188
[62]

Pillai MR, Gostovic D, Kim I, Barnett SA. 2007. Short-period segmented-in-series solid oxide fuel cells on flattened tube supports. Journal of Power Sources 163:960−965

doi: 10.1016/j.jpowsour.2006.09.079
[63]

Kim YB, Ahn SJ, Moon J, Kim J, Lee H. 2006. Direct-write fabrication of integrated planar solid oxide fuel cells. Journal of Electroceramics 17:683−687

doi: 10.1007/s10832-006-6005-1
[64]

Pi SH, Lee SB, Song RH, Lee JW, Lim TH, et al. 2013. Novel ag–glass composite interconnect materials for anode-supported flat-tubular solid oxide fuel cells operated at an intermediate temperature. Fuel Cells 13:392−397

doi: 10.1002/fuce.201200150
[65]

Yun UJ, Lee JW, Lee SB, Lim TH, Park SJ, et al. 2012. Fabrication and operation of tubular segmented-in-series (SIS) solid oxide fuel cells (SOFC). Fuel Cells 12:1099−1103

doi: 10.1002/fuce.201200076
[66]

Miyamoto K, Mihara M, Oozawa H, Hiwatashi K, Tomida K, et al. 2015. Recent progress of SOFC combined cycle system with segmented-in-series tubular type cell stack at MHPS. ECS Transactions 68:51

doi: 10.1149/06801.0051ecst
[67]

Mehran MT, Khan MZ, Song RH, Lim TH, Naqvi M, et al. 2023. A comprehensive review on durability improvement of solid oxide fuel cells for commercial stationary power generation systems. Applied Energy 352:121864

doi: 10.1016/j.apenergy.2023.121864
[68]

Koi M, Yamashita S, Matsuzaki Y. 2007. Development of segmented-in-series cell-stacks with flat-tubular substrates. ECS Transactions 7:235

doi: 10.1149/1.2729097
[69]

Cui D, Ji Y, Chang C, Wang Z, Xiao X, et al. 2020. Influence of structure size on voltage uniformity of flat tubular segmented-in-series solid oxide fuel cell. Journal of Power Sources 460:228092

doi: 10.1016/j.jpowsour.2020.228092
[70]

Fan J, Shi J, Zhang R, Wang Y, Shi Y. 2023. Numerical study of a 20-cell tubular segmented-in-series solid oxide fuel cell. Journal of Power Sources 556:232449

doi: 10.1016/j.jpowsour.2022.232449
[71]

Jamil SM, Othman MHD, Rahman MA, Jaafar J, Ismail AF, et al. 2015. Recent fabrication techniques for micro-tubular solid oxide fuel cell support: a review. Journal of the European Ceramic Society 35:1−22

doi: 10.1016/j.jeurceramsoc.2014.08.034
[72]

Suzuki T, Yamaguchi T, Fujishiro Y, Awano M. 2006. Improvement of SOFC performance using a microtubular, anode-supported SOFC. Journal of The Electrochemical Society 153:A925

doi: 10.1149/1.2185284
[73]

Suzuki T, Hasan Z, Funahashi Y, Yamaguchi T, Fujishiro Y, et al. 2009. Impact of anode microstructure on solid oxide fuel cells. Science 325:852−855

doi: 10.1126/science.1176404
[74]

Suzuki T, Funahashi Y, Yamaguchi T, Fujishiro Y, Awano M. 2009. Effect of anode microstructure on the performance of micro tubular SOFCs. Solid State Ionics 180:546−549

doi: 10.1016/j.ssi.2008.09.023
[75]

Sin YW, Galloway K, Roy B, Sammes NM, Song JH, et al. 2011. The properties and performance of micro-tubular (less than 2.0mm O.D.) anode supported solid oxide fuel cell (SOFC). International Journal of Hydrogen Energy 36:1882−1889

doi: 10.1016/j.ijhydene.2009.12.167
[76]

Calise F, Restucccia G, Sammes N. 2010. Experimental analysis of micro-tubular solid oxide fuel cell fed by hydrogen. Journal of Power Sources 195:1163−1170

doi: 10.1016/j.jpowsour.2009.08.064
[77]

Sun JJ, Koh YH, Choi WY, Kim HE. 2006. Fabrication and characterization of thin and dense electrolyte-coated anode tube using thermoplastic coextrusion. Journal of the American Ceramic Society 89:1713−1716

doi: 10.1111/j.1551-2916.2006.00918.x
[78]

Rahman AHME, Kim M, Kim JH, Lee BT. 2010. Fabrication of seven cells in single tubular solid oxide fuel cell using multi-pass extrusion process. Ceramics International 36:1577−1580

doi: 10.1016/j.ceramint.2010.02.025
[79]

Mani B, Tavakolinia HA, Moghadam RB. 2017. A new design for co-extrusion dies: fabrication of multi-layer tubes to be used as solid oxide fuel cell. Journal of Science: Advanced Materials and Devices 2:425−431

doi: 10.1016/j.jsamd.2017.10.003
[80]

Zhang X, Jin Y, Li D, Xiong Y. 2021. A review on recent advances in micro-tubular solid oxide fuel cells. Journal of Power Sources 506:230135

doi: 10.1016/j.jpowsour.2021.230135
[81]

Tan X, Liu S, Li K. 2001. Preparation and characterization of inorganic hollow fiber membranes. Journal of Membrane Science 188:87−95

doi: 10.1016/S0376-7388(01)00369-6
[82]

Wei CC, Li K. 2008. Yttria-stabilized zirconia (YSZ)-based hollow fiber solid oxide fuel cells. Industrial & Engineering Chemistry Research 47:1506−1512

doi: 10.1021/ie070960v
[83]

Altan T, Timurkutluk C, Onbilgin S, Timurkutluk B. 2023. Novel concept of bolt-microtubular geometry for solid oxide fuel cells. Journal of Power Sources 576:233243

doi: 10.1016/j.jpowsour.2023.233243
[84]

Kim C, Jang I. 2024. Comprehensive review and future perspectives: 3D printing technology for all types of solid oxide cells. Journal of Physics: Energy 6:032003

doi: 10.1088/2515-7655/ad5fbb
[85]

Droushiotis N, Doraswami U, Kanawka K, Kelsall GH, Li K. 2009. Characterization of NiO–yttria stabilised zirconia (YSZ) hollow fibres for use as SOFC anodes. Solid State Ionics 180:1091−1099

doi: 10.1016/j.ssi.2009.04.004
[86]

Othman MHD, Wu Z, Droushiotis N, Kelsall G, Li K. 2010. Morphological studies of macrostructure of Ni–CGO anode hollow fibres for intermediate temperature solid oxide fuel cells. Journal of Membrane Science 360:410−417

doi: 10.1016/j.memsci.2010.05.040
[87]

Chen L, Yao M, Xia C. 2014. Anode substrate with continuous porosity gradient for tubular solid oxide fuel cells. Electrochemistry Communications 38:114−116

doi: 10.1016/j.elecom.2013.11.009
[88]

Yang C, Jin C, Chen F. 2010. Micro-tubular solid oxide fuel cells fabricated by phase-inversion method. Electrochemistry Communications 12:657−660

doi: 10.1016/j.elecom.2010.02.024
[89]

Wang B, Li T, Xiao R, Hartley UW, Ueda M, et al. 2023. Study on the 4-channel micro-monolithic design with geometry control for reversible solid oxide cell. Separation and Purification Technology 315:123732

doi: 10.1016/j.seppur.2023.123732
[90]

Li T, Wu Z, Li K. 2015. Co-extrusion of electrolyte/anode functional layer/anode triple-layer ceramic hollow fibres for micro-tubular solid oxide fuel cells–electrochemical performance study. Journal of Power Sources 273:999−1005

doi: 10.1016/j.jpowsour.2014.10.004
[91]

Kikuta K, Yasue K, Suzuki M, Kanehira S, Kirihara S. 2016. Design and fabrication of micro close end tubular SOFC with internal conduction layer. Journal of the Ceramic Society of Japan 124:360−364

doi: 10.2109/jcersj2.15254
[92]

Huang W, Finnerty C, Sharp R, Wang K, Balili B. 2017. High-performance 3D printed microtubular solid oxide fuel cells. Advanced Materials Technologies 2:1600258

doi: 10.1002/admt.201600258
[93]

Ren C, Gan Y, Yang C, Lee M, Dong G, et al. 2017. Fabrication and characterization of high performance intermediate temperature alumina substrate supported micro-tubular SOFCs. Journal of The Electrochemical Society 164:F722

doi: 10.1149/2.0311707jes
[94]

Suzuki T, Funahashi Y, Yamaguchi T, Fujishiro Y, Awano M. 2007. Fabrication of micro-tubular SOFC stack using ceramic manifold. ECS Transactions 7:477

doi: 10.1149/1.2729126
[95]

Suzuki T, Funahashi Y, Yamaguchi T, Fujishiro Y, Awano M. 2008. Development of cube-type SOFC stacks using anode-supported tubular cells. Journal of Power Sources 175:68−74

doi: 10.1016/j.jpowsour.2007.09.082
[96]

Funahashi Y, Shimamori T, Suzuki T, Fujishiro Y, Awano M. 2009. New fabrication technique for series-connected stack with micro tubular SOFCs. Fuel Cells 9:711−716

doi: 10.1002/fuce.200900004
[97]

Funahashi Y, Suzuki T, Fujishiro Y, Shimamori T, Awano M. 2009. 200 W module design using micro tubular SOFCs. ECS Transactions 25:195

doi: 10.1149/1.3205525
[98]

Zhang R, Wang Y, Shi J, Shi Y. 2023. Design and fabrication of an easily assembled anode supported microtubular SOFC stack. ECS Transactions 111:851

doi: 10.1149/11106.0851ecst
[99]

Lin C, Kerscher F, Spliethoff H. 2025. Thermal gradient management in solid oxide fuel cells: mechanisms, strategies, and future directions. Journal of Power Sources 656:238017

doi: 10.1016/j.jpowsour.2025.238017
[100]

Liang B, Yao Y, Guo J, Yang H, Liang J, et al. 2022. Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window. Applied Energy 309:118404

doi: 10.1016/j.apenergy.2021.118404
[101]

Liu J, Wang C, Yao Y, Ye H, Liu Y, et al. 2024. Double conductive Ni-pads for a kW-class micro-tubular solid oxide fuel cell stack. Journal of Power Sources 591:233843

doi: 10.1016/j.jpowsour.2023.233843
[102]

Ye H, Ma Y, Wang C, Liu J, Liu Y, et al. 2023. A 3D printed redox-stable interconnector for bamboo-like tubular solid oxide fuel cells. International Journal of Hydrogen Energy 48:34979−34986

doi: 10.1016/j.ijhydene.2023.05.324
[103]

Atrex, Ascend Energy. 2017. Atrex, Ascend Energy demonstrate ATV with SOFC range-extender. Fuel Cells Bulletin 2017:3−4

doi: 10.1016/S1464-2859(17)30139-6
[104]

Jaspers BC, Kuo PC, Amladi A, van Neerbos W, Aravind PV. 2021. Negative CO2 Emissions for transportation. Frontiers in Energy Research 9:626538

doi: 10.3389/fenrg.2021.626538
[105]

Shen M. 2021. Solid oxide fuel cell-lithium battery hybrid power generation system energy management: a review. International Journal of Hydrogen Energy 46:32974−32994

doi: 10.1016/j.ijhydene.2021.07.130
[106]

Heidary H, El-Kharouf A, Steinberger-Wilckens R, Bozorgmehri S, Salimi M, et al. 2023. Life cycle assessment of solid oxide fuel cell vehicles in a natural gas producing country; comparison with proton electrolyte fuel cell, battery and gasoline vehicles. Sustainable Energy Technologies and Assessments 59:103396

doi: 10.1016/j.seta.2023.103396
[107]

Meadowcroft AD, Howroyd S, Kendall K, Kendall M. 2013. Testing micro-tubular SOFCs in unmanned air vehicles (UAVs). ECS Transactions 57:451

doi: 10.1149/05701.0451ecst
[108]

Bessekon Y, Zielke P, Wulff AC, Hagen A. 2019. Simulation of a SOFC/battery powered vehicle. International Journal of Hydrogen Energy 44:1905−1918

doi: 10.1016/j.ijhydene.2018.11.126
[109]

Ultra Electronics USSI. 2018. Ultra Electronics USSI wins SOFC contract for UAS platforms. Fuel Cells Bulletin 2018:6−7

doi: 10.1016/S1464-2859(18)30080-4
[110]

Bahari M, Rostami M, Entezari A, Ghahremani S, Etminan M. 2022. A comparative analysis and optimization of two supersonic hybrid SOFC and turbine-less jet engine propulsion system for UAV. Fuel 319:123796

doi: 10.1016/j.fuel.2022.123796
[111]

Giacoppo G, Barbera O, Briguglio N, Cipitì F, Ferraro M, et al. 2017. Thermal study of a SOFC system integration in a fuselage of a hybrid electric mini UAV. International Journal of Hydrogen Energy 42:28022−28033

doi: 10.1016/j.ijhydene.2017.09.063
[112]

Choudhury A, Chandra H, Arora A. 2013. Application of solid oxide fuel cell technology for power generation − a review. Renewable and Sustainable Energy Reviews 20:430−442

doi: 10.1016/j.rser.2012.11.031
[113]

Suzuki M, Takuwa Y, Inoue S, Higaki K. 2013. Durability verification of residential SOFC CHP system. ECS Transactions 57:309

doi: 10.1149/05701.0309ecst
[114]

Aki H, Wakui T, Yokoyama R. 2016. Development of an energy management system for optimal operation of fuel cell based residential energy systems. International Journal of Hydrogen Energy 41:20314−20325

doi: 10.1016/j.ijhydene.2016.09.079
[115]

George RA. 2000. Status of tubular SOFC field unit demonstrations. Journal of Power Sources 86:134−139

doi: 10.1016/S0378-7753(99)00413-9
[116]

Ono T, Miyachi I, Suzuki M, Higaki K. 2011. Development of residential SOFC cogeneration system. IOP Conference Series: Materials Science and Engineering 18:132007

doi: 10.1088/1757-899X/18/13/132007
[117]

Suzuki M, Sogi T, Higaki K, Ono T, Takahashi N, et al. 2007. Development of SOFC residential cogeneration system at Osaka Gas and Kyocera. ECS Transactions 7:27

doi: 10.1149/1.2729069
[118]

Yoda M, Inoue S, Takuwa Y, Yasuhara K, Suzuki M. 2017. Development and commercialization of new residential SOFC CHP system. ECS Transactions 78:125

doi: 10.1149/07801.0125ecst
[119]

Wakui T, Yokoyama R, Shimizu KI. 2010. Suitable operational strategy for power interchange operation using multiple residential SOFC (solid oxide fuel cell) cogeneration systems. Energy 35:740−750

doi: 10.1016/j.energy.2009.09.029
[120]

Pirkandi J, Ghassemi M, Hamedi MH, Mohammadi R. 2012. Electrochemical and thermodynamic modeling of a CHP system using tubular solid oxide fuel cell (SOFC-CHP). Journal of Cleaner Production 29−30:151−162

doi: 10.1016/j.jclepro.2012.01.038
[121]

Baniasadi E, Alemrajabi AA. 2010. Fuel cell energy generation and recovery cycle analysis for residential application. International Journal of Hydrogen Energy 35:9460−9467

doi: 10.1016/j.ijhydene.2010.03.015
[122]

Narayanan M, Mengedoht G, Commerell W. 2021. Evaluation of SOFC-CHP's ability to integrate thermal and electrical energy system decentrally in a single-family house with model predictive controller. Sustainable Energy Technologies and Assessments 48:101643

doi: 10.1016/j.seta.2021.101643
[123]

Yang W, Zhao Y, Liso V, Brandon N. 2014. Optimal design and operation of a syngas-fuelled SOFC micro-CHP system for residential applications in different climate zones in China. Energy and Buildings 80:613−622

doi: 10.1016/j.enbuild.2014.05.015
[124]

Fong KF, Lee CK. 2016. System analysis and appraisal of SOFC-primed micro cogeneration for residential application in subtropical region. Energy and Buildings 128:819−826

doi: 10.1016/j.enbuild.2016.07.060
[125]

Buonomano A, Calise F, d'Accadia MD, Palombo A, Vicidomini M. 2015. Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: A review. Applied Energy 156:32−85

doi: 10.1016/j.apenergy.2015.06.027
[126]

Park SK, Kim TS. 2006. Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems. Journal of Power Sources 163:490−499

doi: 10.1016/j.jpowsour.2006.09.036
[127]

Kobayashi Y, Ando Y, Nishiura M, Kishizawa H, Iwata M, et al. 2013. Recent progress of SOFC combined cycle system with segmented-in-series tubular type cell stack at MHI. ECS Transactions 57:53

doi: 10.1149/05701.0053ecst
[128]

Gandiglio M, De Sario F, Lanzini A, Bobba S, Santarelli M, et al. 2019. Life cycle assessment of a biogas-fed solid oxide fuel cell (SOFC) integrated in a wastewater treatment plant. Energies 12:1611

doi: 10.3390/en12091611
[129]

Kawabata Y, Takeda D, Ochi K, Fujiki H, Oshima T, et al. 2021. Practicality evaluation of solid oxide fuel cell (SOFC) – micro gas turbine (MGT) hybrid power generation system. Proceedings of 14th European SOFC & SOE Forum, Lucerne, Switzerland, October 20−23, 2021, Oberrohrdorf, Switzerland: European Fuel Cell Forum. pp. 132–143 doi: 10.5281/zenodo.4550554
[130]

Zhang B, Maloney D, Farida Harun N, Zhou N, Pezzini P, et al. 2022. Rapid load transition for integrated solid oxide fuel cell – gas turbine (SOFC-GT) energy systems: a demonstration of the potential for grid response. Energy Conversion and Management 258:115544

doi: 10.1016/j.enconman.2022.115544
[131]

Lai H, Adams TA. 2023. Life cycle analyses of SOFC/gas turbine hybrid power plants accounting for long-term degradation effects. Journal of Cleaner Production 412:137411

doi: 10.1016/j.jclepro.2023.137411
[132]

van Biert L, Woudstra T, Godjevac M, Visser K, Aravind PV. 2018. A thermodynamic comparison of solid oxide fuel cell-combined cycles. Journal of Power Sources 397:382−396

doi: 10.1016/j.jpowsour.2018.07.035
[133]

Sghaier SF, Khir T, Ben Brahim A. 2018. Energetic and exergetic parametric study of a SOFC-GT hybrid power plant. International Journal of Hydrogen Energy 43:3542−3554

doi: 10.1016/j.ijhydene.2017.08.216
[134]

Mueller F, Jabbari F, Gaynor R, Brouwer J. 2007. Novel solid oxide fuel cell system controller for rapid load following. Journal of Power Sources 172:308−323

doi: 10.1016/j.jpowsour.2007.05.092
[135]

Mueller F, Tarroja B. 2009. High temperature stationary solid oxide fuel cell systems in the renewable future. ASME 2009 7th International Conference on Fuel Cell Science, Engineering and Technology, June 8−10, 2009, Newport Beach, CA, USA, ASMEDC. pp. 225−235. doi: 10.1115/FuelCell2009-85107
[136]

Xi F, Ruan X, Razmjooy N. 2023. Optimal configuration and energy management for combined solar chimney, solid oxide electrolysis, and fuel cell: a case study in Iran. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 45:9794−9814

doi: 10.1080/15567036.2019.1680770
[137]

Shariatzadeh OJ, Refahi AH, Abolhassani SS, Rahmani M. 2015. Modeling and optimization of a novel solar chimney cogeneration power plant combined with solid oxide electrolysis/fuel cell. Energy Conversion and Management 105:423−432

doi: 10.1016/j.enconman.2015.07.054
[138]

Azadi P. 2012. An integrated approach for the production of hydrogen and methane by catalytic hydrothermal glycerol reforming coupled with parabolic trough solar thermal collectors. International Journal of Hydrogen Energy 37:17691−17700

doi: 10.1016/j.ijhydene.2012.08.045
[139]

Saha AK, Chowdhury S, Chowdhury SP, Gaunt CT. 2009. Integration of wind turbine, SOFC and microturbine in distributed generation. 2009 IEEE Power & Energy Society General Meeting, July 26−30, 2009, Calgary, Canada. IEEE. pp. 1−8 doi: 10.1109/PES.2009.5275268
[140]

Hai T, El-Shafay AS, Alizadeh A, Dhahad HA, Chauhan BS, et al. 2024. Comparison analysis of hydrogen addition into both anode and afterburner of fuel cell incorporated with hybrid renewable energy driven SOFC: an application of techno-environmental horizon and multi-objective optimization. International Journal of Hydrogen Energy 51:1195−1207

doi: 10.1016/j.ijhydene.2023.02.016
[141]

Safari A, Amini Badr A, Farrokhifar M. 2019. Modeling of integrated power system with wind turbine based on a doubly fed induction generator and solid oxide fuel cell for small-signal stability analysis. International Transactions on Electrical Energy Systems 29:e12119

doi: 10.1002/2050-7038.12119
[142]

Obara S, Morel J. 2014. Microgrid composed of three or more SOFC combined cycles without accumulation of electricity. International Journal of Hydrogen Energy 39:2297−2312

doi: 10.1016/j.ijhydene.2013.11.102
[143]

Obara S, Kawae O, Kawai M, Morizane Y. 2013. A study of the installed capacity and electricity quality of a fuel cell-independent microgrid that uses locally produced energy for local consumption. International Journal of Energy Research 37:1764−1783

doi: 10.1002/er.2990