[1]

Wei YM, Kang JN, Liu LC, Li Q, Wang PT, et al. 2021. A proposed global layout of carbon capture and storage in line with a 2 °C climate target. Nature Climate Change 11:112−118

doi: 10.1038/s41558-020-00960-0
[2]

Gao W, Liang S, Wang R, Jiang Q, Zhang Y, et al. 2020. Industrial carbon dioxide capture and utilization: state of the art and future challenges. Chemical Society Reviews 49:8584−8686

doi: 10.1039/d0cs00025f
[3]

Song C, Liu Q, Deng S, Li H , Kitamura Y. 2019. Cryogenic-based CO2 capture technologies: state-of-the-art developments and current challenges. Renewable and Sustainable Energy Reviews 101:265−278

doi: 10.1016/j.rser.2018.11.018
[4]

Jiang K, Li K, Puxty G, Yu H, Feron PHM. 2018. Information derivation from vapor-liquid equilibria data: a simple shortcut to evaluate the energy performance in an amine-based postcombustion CO2 capture. Environmental Science & Technology 52:10893−10901

doi: 10.1021/acs.est.8b03512
[5]

Meng F, Meng Y, Ju T, Han S, Lin L, et al. 2022. Research progress of aqueous amine solution for CO2 capture: a review. Renewable and Sustainable Energy Reviews 168:112902

doi: 10.1016/j.rser.2022.112902
[6]

Zhang X, Zhang S, Tan Z, Zhao S, Peng Y, et al. 2023. One-step synthesis of efficient manganese-based oxide catalyst for ultra-rapid CO2 absorption in MDEA solutions. Chemical Engineering Journal 465:142878

doi: 10.1016/j.cej.2023.142878
[7]

Zhou X, Li X, Wei J, Fan Y, Liao L, et al. 2020. Novel nonaqueous liquid-liquid biphasic solvent for energy-efficient carbon dioxide capture with low corrosivity. Environmental Science & Technology 54:16138−16146

doi: 10.1021/acs.est.0c05774
[8]

Chen Z, Yuan B, Zhan G, Li Y, Li J, et al. 2022. Energy-efficient biphasic solvents for industrial carbon capture: role of physical solvents on CO2 absorption and phase splitting. Environmental Science & Technology 56:12785−13516

doi: 10.1021/acs.est.2c05687
[9]

Aghel B, Janati S, Wongwises S, Shadloo MS. 2022. Review on CO2 capture by blended amine solutions. International Journal of Greenhouse Gas Control 119:103715

doi: 10.1016/j.ijggc.2022.103715
[10]

Bhatti AH, Waris M, Kazmi WW, Bhatti UH, Min GH, et al. 2023. Metal impregnated activated carbon as cost-effective and scalable catalysts for amine-based CO2 capture. Journal of Environmental Chemical Engineering 11:109231

doi: 10.1016/j.jece.2022.109231
[11]

Li X, Xu Q, Liu Z, Chen J, Xie HB, et al. 2023. Nonacid carbon materials as catalysts for monoethanolamine energy-efficient regeneration. Environmental Science & Technology 57:9975−9983

doi: 10.1021/acs.est.3c01459
[12]

Mehra P, Paul A. 2022. Decoding carbon-based materials'properties for high CO2 capture and selectivity. ACS Omega 7:33637−34709

doi: 10.1021/acsomega.2c04269
[13]

Gao Y, He X, Mao K, Russell CK, Toan S, et al. 2023. Catalytic CO2 capture via ultrasonically activating dually functionalized carbon nanotubes. ACS Nano 17:8345−8354

doi: 10.1021/acsnano.2c12762
[14]

Sun X, Li F, Xu Y, Zhang Q, Ma J. 2025. A review on N-doped carbon-based materials for the NH3-SCR reaction. Nanomaterials 15:1544

doi: 10.3390/nano15201566
[15]

Bhatti UH, Kazmi WW, Min GH, Haider J, Nam S, et al. 2021. Facilely synthesized M-montmorillonite (M = Cr, Fe, and Co) as efficient catalysts for enhancing CO2 desorption from amine solution. Industrial & Engineering Chemistry Research 60:13318−13325

doi: 10.1021/acs.iecr.1c02487
[16]

Li T, Yu Q, Barzagli F, Li CE, Che M, et al. 2023. Energy efficient catalytic CO2 desorption: mechanism, technological progress and perspective. Carbon Capture Science & Technology 6:100099

doi: 10.1016/j.ccst.2023.100099
[17]

Tan Z, Zhang S, Zhao F, Zhang R, Tang F, et al. 2023. SnO2/ATP catalyst enabling energy-efficient and green amine-based CO2 capture. Chemical Engineering Journal 453:139801

doi: 10.1016/j.cej.2022.139801
[18]

Tan Z, Zhang S, Yue X, Zhao F, Xi F, et al. 2022. Attapulgite as a cost-effective catalyst for low-energy consumption amine-based CO2 capture. Separation and Purification Technology 298:121577

doi: 10.1016/j.seppur.2022.121577
[19]

Tan Z, Zhang X, Zhang S, Peng Y, Zhao S, et al. 2024. Enhancing CO2 desorption rate in rich MEA solutions by metal-modified attapulgite catalyst. Separation and Purification Technology 330:125513

doi: 10.1016/j.seppur.2023.125513
[20]

Zhang R, Li T, Zhang Y, Ha J, Xiao Y, et al. 2022. CuO modified KIT-6 as a high-efficiency catalyst for energy-efficient amine solvent regeneration. Separation and Purification Technology 300:121702

doi: 10.1016/j.seppur.2022.121702
[21]

Zhang X, Huang Y, Yang J, Gao H, Huang Y, et al. 2020. Amine-based CO2 capture aided by acid-basic bifunctional catalyst: advancement of amine regeneration using metal modified MCM-41. Chemical Engineering Journal 383:123077

doi: 10.1016/j.cej.2019.123077
[22]

Zhang X, Zhu Z, Sun X, Yang J, Gao H, et al. 2019. Reducing energy penalty of CO2 capture using Fe promoted SO42-/ZrO2/MCM-41 catalyst. Environmental Science & Technology 53:6094−6102

doi: 10.1021/acs.est.9b01901
[23]

Xing L, Wei K, Li Y, Fang Z, Li Q, et al. 2021. TiO2 coating strategy for robust catalysis of the metal-organic framework toward energy-efficient CO2 capture. Environmental Science & Technology 55:11216−11224

doi: 10.1021/acs.est.1c02452
[24]

Li Y, Chen Z, Zhan G, Yuan B, Wang L, et al. 2022. Inducing efficient proton transfer through Fe/Ni@COF to promote amine-based solvent regeneration for achieving low-cost capture of CO2 from industrial flue gas. Separation and Purification Technology 298:121676

doi: 10.1016/j.seppur.2022.121676
[25]

Wang W, Song Q, Luo Q, Li L, Huo X, et al. 2023. Photothermal-enabled single-atom catalysts for high-efficiency hydrogen peroxide photosynthesis from natural seawater. Nature Communications 14:2493

doi: 10.1038/s41467-023-38211-3
[26]

Liu H, Zhang X, Gao H, Liang Z, Idem R, et al. 2017. Investigation of CO2 regeneration in single and blended amine solvents with and without catalyst. Industrial & Engineering Chemistry Research 56:7656−7664

doi: 10.1021/acs.iecr.7b00778
[27]

Zhang X, Zhang X, Liu H, Li W, Xiao M, et al. 2017. Reduction of energy requirement of CO2 desorption from a rich CO2-loaded MEA solution by using solid acid catalysts. Applied Energy 202:673−684

doi: 10.1016/j.apenergy.2017.05.135
[28]

Zhang X, Zhang R, Liu H, Gao H, Liang Z. 2018. Evaluating CO2 desorption performance in CO2-loaded aqueous tri-solvent blend amines with and without solid acid catalysts. Applied Energy 218:417−429

doi: 10.1016/j.apenergy.2018.02.087
[29]

Bhatti UH, Shah AK, Kim JN, You JK, Choi SH, et al. 2017. Effects of transition metal oxide catalysts on MEA solvent regeneration for the post-combustion carbon capture process. ACS Sustainable Chemistry & Engineering 5:5862−5868

doi: 10.1021/acssuschemeng.7b00604
[30]

Alivand MS, Mazaheri O, Wu Y, Zavabeti A, Christofferson AJ, et al. 2022. Engineered assembly of water-dispersible nanocatalysts enables low-cost and green CO2 capture. Nature Communications 13:1249

doi: 10.1038/s41467-022-28869-6
[31]

Li MF, Liu YG, Liu SB, Shu D, Zeng GM, et al. 2017. Cu(II)-influenced adsorption of ciprofloxacin from aqueous solutions by magnetic graphene oxide/nitrilotriacetic acid nanocomposite: competition and enhancement mechanisms. Chemical Engineering Journal 319:219−228

doi: 10.1016/j.cej.2017.03.016
[32]

Georgakilas V, Perman JA, Tucek J, Zboril R. 2015. Broad family of carbon nanoallotropes: classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures. Chemical Reviews 115:4744−4822

doi: 10.1021/cr500304f
[33]

Banal JL, Zhang B, Jones DJ, Ghiggino KP, Wong WWH. 2017. Emissive molecular aggregates and energy migration in luminescent solar concentrators. Accounts of Chemical Research 50:49−57

doi: 10.1021/acs.accounts.6b00432
[34]

Liu L, Chen X. 2014. Titanium dioxide nanomaterials: self-structural modifications. Chemical Reviews 114:9890−9918

doi: 10.1021/cr400624r
[35]

Lu S, Xue Y, Meng F, Liu M, Hou T, et al. 2025. In-situ synthesis of Fe-MOR molecular sieve catalyst for energy-efficient CO2 capture. Carbon Capture Science & Technology 15:100433

doi: 10.1016/j.ccst.2025.100433
[36]

Rao L, Jin B, Chen D, Jin X, Liu G, et al. 2024. Energy-saving CO2 desorption from amine solution over Fe/SiO2/biochar catalysts: desorption performance, structure-activity relationship, and mechanism. Chemical Engineering Journal 483:149413

doi: 10.1016/j.cej.2024.149413
[37]

Zhou Z, Zheng J, Shao L, Zhang X, Pan C, et al. 2025. Ni/Fe-loaded mesoporous KIT-6 enhanced proton transfer for efficient CO2 desorption. Chemical Engineering Journal 522:167863

doi: 10.1016/j.cej.2025.167863
[38]

Sakthivel S, Shankar MV, Palanichamy M, Arabindoo B, Bahnemann DW, et al. 2004. Enhancement of photocatalytic activity by metal deposition: characterisation and photonic efficiency of Pt, Au and Pd deposited on TiO2 catalyst. Water Research 38:3001−3008

doi: 10.1016/j.watres.2004.04.046
[39]

Liu R, Liu R, Ma X, Davis BH, Li Z. 2018. Efficient diesel production over the iron-based Fischer-Tropsch catalyst supported on CNTs treated by urea/NaOH. Fuel 211:827−836

doi: 10.1016/j.fuel.2017.09.114
[40]

Liu XM, Romero HE, Gutierrez HR, Adu K, Eklund PC. 2008. Transparent boron-doped carbon nanotube films. Nano Letters 8:2613−2619

doi: 10.1021/nl0729734
[41]

Ud Din I, Shaharun MS, Subbarao D, Naeem A. 2016. Surface modification of carbon nanofibers by HNO3 treatment. Ceramics International 42:966−970

doi: 10.1016/j.ceramint.2015.08.054
[42]

Yoon CM, Long D, Jang SM, Qiao W, Ling L, et al. 2011. Electrochemical surface oxidation of carbon nanofibers. Carbon 49:96−105

doi: 10.1016/j.carbon.2010.08.047
[43]

You X, Wu H, Zhang R, Su Y, Cao L, et al. 2019. Metal-coordinated sub-10 nm membranes for water purification. Nature Communications 10:4160

doi: 10.1038/s41467-019-12100-0
[44]

Yang J, Zhao Y, Liang S, Zhang S, Ma S, et al. 2018. Magnetic iron–manganese binary oxide supported on carbon nanofiber (Fe3−xMnxO4/CNF) for efficient removal of Hg0 from coal combustion flue gas. Chemical Engineering Journal 334:216−224

doi: 10.1016/j.cej.2017.10.004
[45]

Dong L, Zang J, Wang W, Liu X, Zhang Y, et al. 2020. Electrospun single iron atoms dispersed carbon nanofibers as high performance electrocatalysts toward oxygen reduction reaction in acid and alkaline media. Journal of Colloid and Interface Science 564:134−142

doi: 10.1016/j.jcis.2019.12.120
[46]

Luo J, Luo X, Crittenden J, Qu J, Bai Y, et al. 2015. Removal of antimonite (Sb(III)) and antimonate (Sb(V)) from aqueous solution using carbon nanofibers that are decorated with zirconium oxide (ZrO2). Environmental Science & Technology 49:11115−11124

doi: 10.1021/acs.est.5b02903
[47]

Fang R, Xu R, Zhang L, Sun X, Wang Y, et al. 2022. Polarization structural design in core–shell fillers: an approach to significantly enhance the energy storage properties of BST/PVDF composite films. ACS Applied Electronic Materials 4:2534−2544

doi: 10.1021/acsaelm.2c00307
[48]

Idem R, Shi H, Gelowitz D, Tontiwachwuthikul P. 2017. U. S. Catalytic method and apparatus for separating a gaseous component from an incoming gas stream. WO Patent No. US9586175
[49]

Lai Q, Toan S, Assiri MA, Cheng H, Russell AG, et al. 2018. Catalyst-TiO(OH)2 could drastically reduce the energy consumption of CO2 capture. Nature Communications 9:2672

doi: 10.1038/s41467-018-05145-0