[1]

Shih CF, Zhang T, Li J, Bai C. 2018. Powering the future with liquid sunshine. Joule 2(10):1925−1949

doi: 10.1016/j.joule.2018.08.016
[2]

Li J, Zhu X, Djilali N, Yang Y, Ye D, et al. 2022. Comparative well-to-pump assessment of fueling pathways for zero-carbon transportation in China: hydrogen economy or methanol economy? Renewable and Sustainable Energy Reviews 169:112935

doi: 10.1016/j.rser.2022.112935
[3]

Eggemann L, Escobar N, Peters R, Burauel P, Stolten D. 2020. Life cycle assessment of a small-scale methanol production system: a Power-to-Fuel strategy for biogas plants. Journal of Cleaner Production 271:122476

doi: 10.1016/j.jclepro.2020.122476
[4]

Harris K, Grim RG, Huang Z, Tao L. 2021. A comparative techno-economic analysis of renewable methanol synthesis from biomass and CO2: opportunities and barriers to commercialization. Applied Energy 303:117637

doi: 10.1016/j.apenergy.2021.117637
[5]

Li Y, Jia M, Chang Y, Liu Y, Xie M, et al. 2014. Parametric study and optimization of a RCCI (reactivity controlled compression ignition) engine fueled with methanol and diesel. Energy 65:319−332

doi: 10.1016/j.energy.2013.11.059
[6]

Yin X, Yue G, Liu J, Duan H, Duan Q, et al. 2023. Investigation into the operating range of a dual-direct injection engine fueled with methanol and diesel. Energy 267:126625

doi: 10.1016/j.energy.2023.126625
[7]

Chen X, Wang H, Song C, Wang W, Huang J, et al. 2014. Investigation of the cold-start engine performance at a low temperature for an engine fuelled with alternative fuel. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 228(3):310−318

doi: 10.1177/0954407013511070
[8]

Liu H, Zhang X, Zhang Z, Wu Y, Wang C, et al. 2023. Effects of 2-ethylhexyl nitrate (EHN) on combustion and emissions on a compression ignition engine fueling high-pressure direct-injection pure methanol fuel. Fuel 341:127684

doi: 10.1016/j.fuel.2023.127684
[9]

Cheng C, Faurskov Cordtz R, Berg Thomsen T, Langballe Førby N, Schramm J. 2022. Application of methanol with an ignition improver in a small marine CI engine. Energy Conversion and Management 271:116311

doi: 10.1016/j.enconman.2022.116311
[10]

Sezer İ. 2020. A review study on using diethyl ether in diesel engines: effects on fuel properties, injection, and combustion characteristics. Energy & Environment 31(2):179−214

doi: 10.1177/0958305X19856751
[11]

Xu Z, Wang J, Zhao P, Jia M, Chang Y, et al. 2024. Exploring energy utilization of the methanol/dimethyl ether dual-fuel engine under the methanol reforming strategy: a comparison of different low-temperature combustion modes. Energy 312:133659

doi: 10.1016/j.energy.2024.133659
[12]

Calam A, Aydoğan B, Halis S. 2020. The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine. Fuel 266:117071

doi: 10.1016/j.fuel.2020.117071
[13]

Jang J, Yang K, Bae C. 2009. The effect of injection location of DME and LPG in a dual fuel HCCI engine. Powertrains, Fuels and Lubricants Meeting, Florence, Italy, June 15, 2009. SAE International. doi: 10.4271/2009-01-1847
[14]

Yao M, Huang C, Zheng Z. 2007. Multidimensional numerical simulation on dimethyl ether/methanol dual-fuel homogeneous charge compression ignition (HCCI) engine combustion and emission processes. Energy & Fuels 21(2):812−821

doi: 10.1021/ef0604745
[15]

Lee H, Lim O. 2016. A computational study of DME-methanol fractions with controlling several factors on HCCI combustion. Journal of Mechanical Science and Technology 30(4):1931−1941

doi: 10.1007/s12206-016-0352-x
[16]

Taghavifar H, Nemati A, Walther JH. 2019. Combustion and exergy analysis of multi-component diesel-DME-methanol blends in HCCI engine. Energy 187:115951

doi: 10.1016/j.energy.2019.115951
[17]

Wang H, Fang R, Weber BW, Sung CJ. 2018. An experimental and modeling study of dimethyl ether/methanol blends autoignition at low temperature. Combustion and Flame 198:89−99

doi: 10.1016/j.combustflame.2018.09.012
[18]

Song W, Tingas EA, Im HG. 2018. A computational analysis of methanol autoignition enhancement by dimethyl ether addition in a counterflow mixing layer. Combustion and Flame 195:84−98

doi: 10.1016/j.combustflame.2018.03.037
[19]

Yan C, Zhao H, Wang Z, Song G, Lin Y, et al. 2022. Low-and intermediate-temperature oxidation of dimethyl ether up to 100 atm in a supercritical pressure jet-stirred reactor. Combustion and Flame 243:112059

doi: 10.1016/j.combustflame.2022.112059
[20]

Burke U, Somers KP, O'Toole P, Zinner CM, Marquet N, et al. 2015. An ignition delay and kinetic modeling study of methane, dimethyl ether, and their mixtures at high pressures. Combustion and Flame 162(2):315−330

doi: 10.1016/j.combustflame.2014.08.014
[21]

Wang Z, Zhang X, Xing L, Zhang L, Herrmann F, et al. 2015. Experimental and kinetic modeling study of the low-and intermediate-temperature oxidation of dimethyl ether. Combustion and Flame 162(4):1113−1125

doi: 10.1016/j.combustflame.2014.10.003
[22]

Hashemi H, Christensen JM, Glarborg P. 2019. High-pressure pyrolysis and oxidation of DME and DME/CH4. Combustion and Flame 205:80−92

doi: 10.1016/j.combustflame.2019.03.028
[23]

Reuter CB, Zhang R, Yehia OR, Rezgui Y, Ju Y. 2018. Counterflow flame experiments and chemical kinetic modeling of dimethyl ether/methane mixtures. Combustion and Flame 196:1−10

doi: 10.1016/j.combustflame.2018.06.004
[24]

Pelucchi M, Cavallotti C, Faravelli T, Klippenstein SJ. 2018. H-Abstraction reactions by OH, HO2, O, O2 and benzyl radical addition to O2 and their implications for kinetic modelling of toluene oxidation. Physical Chemistry Chemical Physics 20(16):10607−10627

doi: 10.1039/C7CP07779C
[25]

Klippenstein SJ. 2017. From theoretical reaction dynamics to chemical modeling of combustion. Proceedings of the Combustion Institute 36(1):77−111

doi: 10.1016/j.proci.2016.07.100
[26]

Klippenstein SJ, Sivaramakrishnan R, Burke U, Somers KP, Curran HJ, et al. 2022. HȮ2+ HȮ2: high level theory and the role of singlet channels. Combustion and Flame 243:111975

doi: 10.1016/j.combustflame.2021.111975
[27]

Zhao H, Yan C, Song G, Wang Z, Jasper AW, et al. 2024. High-pressure oxidation of hydrogen diluted in N2 with added H2O or CO2 at 100 atm in a supercritical-pressure jet-stirred reactor. Combustion and Flame 266:113543

doi: 10.1016/j.combustflame.2024.113543
[28]

Mulvihill CR, Danilack AD, Goldsmith CF, Demireva M, Sheps L, et al. 2021. Non-Boltzmann effects in chain branching and pathway branching for diethyl ether oxidation. Energy & Fuels 35(21):17890−17908

doi: 10.1021/acs.energyfuels.1c02196
[29]

Zhao H, Yang X, Ju Y. 2016. Princeton HP-Mech. Kinetic studies of ozone assisted low temperature oxidation of dimethyl ether in a flow reactor using molecular-beam mass spectrometry. Combustion and Flame 173:187−194

doi: 10.1016/j.combustflame.2016.08.008
[30]

Carr SA, Still TJ, Blitz MA, Eskola AJ, Seakins PW, et al. 2013. Experimental and theoretical study of the kinetics and mechanism of the reaction of OH radicals with dimethyl ether. The Journal of Physical Chemistry A 117(44):11142−11154

doi: 10.1021/jp4070278
[31]

Sivaramakrishnan R, Michael JV, Wagner AF, Dawes R, Jasper AW, et al. 2011. Roaming radicals in the thermal decomposition of dimethyl ether: experiment and theory. Combustion and Flame 158(4):618−632

doi: 10.1016/j.combustflame.2010.12.017
[32]

Marshall P, Glarborg P. 2015. Ab initio and kinetic modeling studies of formic acid oxidation. Proceedings of the Combustion Institute 35(1):153−160

doi: 10.1016/j.proci.2014.05.091
[33]

De Goey LPH, Somers LMT, Bosch WMML, Mallens RMM. 1995. Modeling of the small scale structure of flat burner-stabilized flames. Combustion Science and Technology 104(4−6):387−400

doi: 10.1080/00102209508907729
[34]

Wang Z, Han X, He Y, Zhu R, Zhu Y, et al. 2021. Experimental and kinetic study on the laminar burning velocities of NH3 mixing with CH3OH and C2H5OH in premixed flames. Combustion and Flame 229:111392

doi: 10.1016/j.combustflame.2021.02.038
[35]

Saeed K, Stone CR. 2004. Measurements of the laminar burning velocity for mixtures of methanol and air from a constant-volume vessel using a multizone model. Combustion and Flame 139(1−2):152−166

doi: 10.1016/j.combustflame.2004.08.008
[36]

Sileghem L, Alekseev VA, Vancoillie J, Nilsson EJK, Verhelst S, et al. 2014. Laminar burning velocities of primary reference fuels and simple alcohols. Fuel 115:32−40

doi: 10.1016/j.fuel.2013.07.004
[37]

Vancoillie J, Christensen M, Nilsson EJK, Verhelst S, Konnov AA. 2012. Temperature dependence of the laminar burning velocity of methanol flames. Energy & Fuels 26(3):1557−1564

doi: 10.1021/ef2016683
[38]

Metghalchi M, Keck JC. 1982. Burning velocities of mixtures of air with methanol, isooctane, and indolene at high pressure and temperature. Combustion and Flame 48:191−210

doi: 10.1016/0010-2180(82)90127-4
[39]

Wang Z, Wang S, Whiddon R, Han X, He Y, et al. 2018. Effect of hydrogen addition on laminar burning velocity of CH4/DME mixtures by heat flux method and kinetic modeling. Fuel 232:729−742

doi: 10.1016/j.fuel.2018.05.146
[40]

Qin X, Ju Y. 2005. Measurements of burning velocities of dimethyl ether and air premixed flames at elevated pressures. Proceedings of the Combustion Institute 30(1):233−240

doi: 10.1016/j.proci.2004.08.251
[41]

Yu H, Hu E, Cheng Y, Yang K, Zhang X, et al. 2015. Effects of hydrogen addition on the laminar flame speed and markstein length of premixed dimethyl ether–air flames. Energy & Fuels 29(7):4567−4575

doi: 10.1021/acs.energyfuels.5b00501
[42]

Daly CA, Simmie JM, Würmel J, DjebaÏli N, Paillard C. 2001. Burning velocities of dimethyl ether and air. Combustion and Flame 125(4):1329−1340

doi: 10.1016/S0010-2180(01)00249-8
[43]

Wang YL, Holley AT, Ji C, Egolfopoulos FN, Tsotsis TT, et al. 2009. Propagation and extinction of premixed dimethyl-ether/air flames. Proceedings of the Combustion Institute 32(1):1035−1042

doi: 10.1016/j.proci.2008.06.054
[44]

Burke U, Metcalfe WK, Burke SM, Heufer KA, Dagaut P, et al. 2016. A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation. Combustion and Flame 165:125−136

doi: 10.1016/j.combustflame.2015.11.004
[45]

Xiao H, Valera-Medina A, Bowen PJ. 2017. Study on premixed combustion characteristics of co-firing ammonia/methane fuels. Energy 140:125−135

doi: 10.1016/j.energy.2017.08.077
[46]

Chu X, Li X, Gao P, Ma Z, Xiao H, et al. 2024. High-temperature auto-ignition characteristics of NH3-H2-CH4. Fuel 365:131228

doi: 10.1016/j.fuel.2024.131228
[47]

Olm C, Zsély IG, Pálvölgyi R, Varga T, Nagy T, et al. 2014. Comparison of the performance of several recent hydrogen combustion mechanisms. Combustion and Flame 161(9):2219−2234

doi: 10.1016/j.combustflame.2014.03.006