[1]

Zhang X, She Y, Wen X, Hu G, Yu X, et al. 2026. Upcycling waste plastic into electrocatalyst: waste nylon fishnet-derived flexible & rigid Co/Fe-MOF for efficient oxygen evolution reaction. Applied Catalysis B: Environment and Energy 384:126184

doi: 10.1016/j.apcatb.2025.126184
[2]

Yang W, Jung S, Lee J, Lee SW, Kim YT, et al. 2023. Selective recovery of caprolactam from the thermo-catalytic conversion of textile waste over γ-Al2O3 supported metal catalysts. Environmental Pollution 329:121684

doi: 10.1016/j.envpol.2023.121684
[3]

Liu Z, Yang Y, Xie M, Cheng M, Yang R, et al. 2024. TG-FTIR-Py-GCMS analysis and catalytic pyrolysis mechanism of textile waste by red mud catalyst for liquid fuel production. Science of the Total Environment 952:175874

doi: 10.1016/j.scitotenv.2024.175874
[4]

Conk RJ, Stahler JF, Shi JX, Yang J, Lefton NG, et al. 2024. Polyolefin waste to light olefins with ethylene and base-metal heterogeneous catalysts. Science 385:1322−1327

doi: 10.1126/science.adq7316
[5]

Cai N, Jia S, Sun K, Zhu J, Zhao C, et al. 2025. High-Value utilization of waste plastics: transforming plastic polymers into thin-walled and uniform carbon nanotubes via catalytic pyrolysis. Green Energy & Environment

doi: 10.1016/j.gee.2025.10.004
[6]

Xiao H, Harding J, Lei S, Chen W, Xia S, et al. 2022. Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene. Journal of Cleaner Production 350:131467

doi: 10.1016/j.jclepro.2022.131467
[7]

Xiao H, Li S, Shi Z, Cui C, Xia S, et al. 2023. Plasma-catalytic pyrolysis of polypropylene for hydrogen and carbon nanotubes: understanding the influence of plasma on volatiles. Applied Energy 351:121848

doi: 10.1016/j.apenergy.2023.121848
[8]

Munyaneza NE, Ji R, DiMarco A, Miscall J, Stanley L, et al. 2024. Chain-length-controllable upcycling of polyolefins to sulfate detergents. Nature Sustainability 7:1681−1690

doi: 10.1038/s41893-024-01464-x
[9]

Sukkasem T, Yoojaroen N, Truadnog Y, Prayutte P, Junpirom S, et al. 2026. Converting polystyrene waste into valuable oils: high performance of SUZ-4 zeolite for selective oil component conversion in catalytic pyrolysis. Fuel 405:136456

doi: 10.1016/j.fuel.2025.136456
[10]

Wang Z, Shen J, Liu X, Guo Y, Wang S, et al. 2023. A review on nitrogen migration mechanism during the pyrolysis of organic solid waste: DFT, ReaxFF MD and experimental study. Journal of Analytical and Applied Pyrolysis 176:106250

doi: 10.1016/j.jaap.2023.106250
[11]

Wang P, Qiao L, Wang W, Yu J, Millan M. 2023. The behavior of heteroatom compounds during the pyrolysis of waste composite plastics. Journal of Analytical and Applied Pyrolysis 173:106080

doi: 10.1016/j.jaap.2023.106080
[12]

de Rezende Locatel W, Mohabeer C, Laurenti D, Schuurman Y, Guilhaume N. 2022. Co-pyrolysis of beech wood and polyamide-6: impact of plastic concentration and wood/plastic synergistic effects. Journal of Analytical and Applied Pyrolysis 168:105779

doi: 10.1016/j.jaap.2022.105779
[13]

de Rezende Locatel W, Mohabeer C, Laurenti D, Schuurman Y, Guilhaume N. 2022. Co-pyrolysis of beech wood and polyamide-6: effect of HZSM-5 catalyst on the properties of pyrolysis oils. Journal of Analytical and Applied Pyrolysis 167:105696

doi: 10.1016/j.jaap.2022.105696
[14]

Kumagai S, Hosaka T, Kameda T, Yoshioka T. 2015. Steam pyrolysis of polyimides: effects of steam on raw material recovery. Environmental Science & Technology 49:13558−13565

doi: 10.1021/acs.est.5b03253
[15]

Kumar A, von Wolff N, Rauch M, Zou YQ, Shmul G, et al. 2020. Hydrogenative depolymerization of nylons. Journal of the American Chemical Society 142:14267−14275

doi: 10.1021/jacs.0c05675
[16]

Chen G, Liu T, Luan P, Li N, Sun Y, et al. 2023. Distribution, migration, and removal of N-containing products during polyurethane pyrolysis: a review. Journal of Hazardous Materials 453:131406

doi: 10.1016/j.jhazmat.2023.131406
[17]

Zheng B, Li Y, Ma H, Chen G, Gu Y, et al. 2024. Pyrolysis characteristics, kinetics and products of flexible polyurethane foam in luxury cruise ship via TG, FTIR, GC-MS and Shuffled Complex Evolution. Journal of Analytical and Applied Pyrolysis 179:106497

doi: 10.1016/j.jaap.2024.106497
[18]

Xu D, Lin J, Sun S, Ma R, Wang M, et al. 2022. Microwave pyrolysis of biomass model compounds for bio-oil: formation mechanisms of the nitrogenous chemicals and DFT calculations. Energy Conversion and Management 262:115676

doi: 10.1016/j.enconman.2022.115676
[19]

Wang G, Zhang Z, Xu D, Xing B, Zhu L, et al. 2023. Insight into pyrolysis mechanism of plastic waste with C-O/C-N bonds in the backbone. Science of the Total Environment 897:165359

doi: 10.1016/j.scitotenv.2023.165359
[20]

Xuan W, Yan S, Dong Y. 2023. Exploration of pyrolysis behaviors of waste plastics (polypropylene plastic/polyethylene plastic/polystyrene plastic): macro-thermal kinetics and micro-pyrolysis mechanism. Processes 11:2764

doi: 10.3390/pr11092764
[21]

Huang J, Meng H, Luo X, Mu X, Xu W, et al. 2022. Insights into the thermal degradation mechanisms of polyethylene terephthalate dimer using DFT method. Chemosphere 291:133112

doi: 10.1016/j.chemosphere.2021.133112
[22]

Zheng Z, Yao JL, Yao Q. 2024. Thermal degradation of polyamide 66 and its model compound. Polymer Degradation and Stability 228:110909

doi: 10.1016/j.polymdegradstab.2024.110909
[23]

Xu D, Wei Y, Xiao H, Zhang T, Sheng Z, et al. 2026. Pyrolysis kinetics, volatile evolution, and backbone degradation mechanisms of typical nitrogen-containing plastics based on TG-FTIR-GC/MS and density functional theory. Journal of Analytical and Applied Pyrolysis 193:107418

doi: 10.1016/j.jaap.2025.107418
[24]

Xu D, Lin J, Ma R, Hou J, Sun S, et al. 2023. Fast pyrolysis of algae model compounds for bio-oil: in-depth insights into the volatile interaction mechanisms based on DFT calculations. Fuel 333:126449

doi: 10.1016/j.fuel.2022.126449
[25]

Wei P, Chen G, Zhi F, Zhang A, Deng H, et al. 2024. Investigation of pyrolysis and combustion characteristics of chili straw waste with different O2/N2 ratios and heating rates. Thermochimica Acta 742:179875

doi: 10.1016/j.tca.2024.179875
[26]

Wu C, Ge S, Li J, Shi B, Wang Y, et al. 2023. The effect of N2/CO2 blend ratios on the pyrolysis and combustion behaviors of coal particles: kinetic and thermodynamic analyses. Journal of Loss Prevention in the Process Industries 84:105120

doi: 10.1016/j.jlp.2023.105120
[27]

Frisch MJ, Trucks GW, Schlegel HB, Scuseria GE, Robb MA, et al. 2016. Gaussian 16 Rev. C. 01. Wallingford, CT
[28]

Lu T, Chen F. 2011. Multiwfn: a multifunctional wavefunction analyzer. Journal of Computational Chemistry 33:580−592

doi: 10.1002/jcc.22885
[29]

Qu W, Chen C, Tang Z, Xia D, Ma D, et al. 2022. Electron-rich/poor reaction sites enable ultrafast confining Fenton-like processes in facet-engineered BiOI membranes for water purification. Applied Catalysis B: Environmental 304:120970

doi: 10.1016/j.apcatb.2021.120970
[30]

Didovets Y, Brela MZ. 2022. Theoretical study on the thermal degradation process of nylon 6 and polyhydroxybutyrate. Physchem 2:334−346

doi: 10.3390/physchem2040024
[31]

Luo M, Shao S, Cao Y, Li X, Wu S. 2025. A study on the characteristics and kinetic of co-catalytic pyrolysis with rape straw and ABS waste plastics. Renewable Energy 242:122450

doi: 10.1016/j.renene.2025.122450
[32]

Zhang L, Zhou N, Ke L, Zeng Y, Wu Q, et al. 2025. Understanding the role of plastic additives in the pyrolysis of plastic wastes: impact of additives on product selectivity, kinetics, and mechanistic pathways. Chemical Engineering Journal 514:163194

doi: 10.1016/j.cej.2025.163194
[33]

Chen R, Song X, in’t Veld PJ, Luo C. 2025. Crystallization and heterogeneous local stress distribution in hydrogen-bonded polymers: molecular dynamics simulations of polyamide 6 (PA6). Macromolecules 58:424−438

doi: 10.1021/acs.macromol.4c02182