[1]

Jiao K, Xuan J, Du Q, Bao Z, Xie B, et al. 2021. Designing the next generation of proton-exchange membrane fuel cells. Nature 595:361−369

doi: 10.1038/s41586-021-03482-7
[2]

Luo S, Zhang K, Li G, Li X, Wang Q, et al. 2026. Current status and prospects of fuel cell electric vehicle industrialization in China. Carbon Neutrality 5:18

doi: 10.1007/s43979-026-00171-0
[3]

Zhang R, Chen L, Min T, Mu YT, Hao L, et al. 2024. Multiscale study of reactive transport and multiphase heat transfer processes in catalyst layers of proton exchange membrane fuel cells. Carbon Neutrality 3:14

doi: 10.1007/s43979-024-00089-5
[4]

Ni W, Xia Z, Sun R, Zhang Z, Chen X, et al. 2026. Gas diffusion layer regulated phosphoric acid distribution for durable high-temperature polymer electrolyte membrane fuel cells under high-current loading. Carbon Neutrality 5:15

doi: 10.1007/s43979-026-00169-8
[5]

Fadzillah DM, Rosli MI, Talib MZM, Kamarudin SK, Daud WRW. 2017. Review on microstructure modelling of a gas diffusion layer for proton exchange membrane fuel cells. Renewable and Sustainable Energy Reviews 77:1001−1009

doi: 10.1016/j.rser.2016.11.235
[6]

Wu W, Zhai C, Sui Z, Sui Y, Luo X. 2021. Proton exchange membrane fuel cell integrated with microchannel membrane-based absorption cooling for hydrogen vehicles. Renewable Energy 178:560−573

doi: 10.1016/j.renene.2021.06.098
[7]

Chen Q, Zhang G, Zhang X, Sun C, Jiao K, et al. 2021. Thermal management of polymer electrolyte membrane fuel cells: a review of cooling methods, material properties, and durability. Applied Energy 286:116496

doi: 10.1016/j.apenergy.2021.116496
[8]

Jiao D, Jiao K, Du Q. 2021. Numerical investigations of vapor condensation and water transport in gas diffusion layers of PEMFC. International Journal of Heat and Mass Transfer 177:121543

doi: 10.1016/j.ijheatmasstransfer.2021.121543
[9]

Chu HS, Yeh C, Chen F. 2003. Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell. Journal of Power Sources 123:1−9

doi: 10.1016/S0378-7753(02)00605-5
[10]

Zamel N, Li X, Shen J, Becker J, Wiegmann A. 2010. Estimating effective thermal conductivity in carbon paper diffusion media. Chemical Engineering Science 65:3994−4006

doi: 10.1016/j.ces.2010.03.047
[11]

Wang Y, Gundevia M. 2013. Measurement of thermal conductivity and heat pipe effect in hydrophilic and hydrophobic carbon papers. International Journal of Heat and Mass Transfer 60:134−142

doi: 10.1016/j.ijheatmasstransfer.2012.12.016
[12]

Ko D, Doh S, Park HS, Kim MH. 2018. The effect of through plane pore gradient GDL on the water distribution of PEMFC. International Journal of Hydrogen Energy 43:2369−2380

doi: 10.1016/j.ijhydene.2017.12.007
[13]

Hao J, Ma T, Zhou J, Wei H, Kong Y, et al. 2024. Structural gradient optimization of diffusion layer based on finite data mapping method for PEMFC performance improvement. International Journal of Heat and Mass Transfer 220:124948

doi: 10.1016/j.ijheatmasstransfer.2023.124948
[14]

Balakrishnan M, Shrestha P, Ge N, Lee C, Fahy KF, et al. 2020. Designing tailored gas diffusion layers with pore size gradients via electrospinning for polymer electrolyte membrane fuel cells. ACS Applied Energy Materials 3:2695−2707

doi: 10.1021/acsaem.9b02371
[15]

Wang YD, Meyer Q, Tang K, McClure JE, White RT, et al. 2023. Large-scale physically accurate modelling of real proton exchange membrane fuel cell with deep learning. Nature Communications 14:745

doi: 10.1038/s41467-023-35973-8
[16]

Lai T, Qu Z. 2023. Pore-scale parametric sensitivity analysis of liquid water transport in the gas diffusion layer of polymer electrolyte membrane fuel cell. Applied Thermal Engineering 229:120616

doi: 10.1016/j.applthermaleng.2023.120616
[17]

Habiballahi M, Hassanzadeh H, Rahnama M, Ali Mirbozorgi S, Jahanshahi Javaran E. 2021. Effect of porosity gradient in cathode gas diffusion layer of polymer electrolyte membrane fuel cells on the liquid water transport using lattice Boltzmann method. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 235:546−562

doi: 10.1177/0957650920934312
[18]

Lai T, Qu Z. 2023. Two polytetrafluoroethylene distribution effects on liquid water dynamic behavior in gas diffusion layer of polymer electrolyte membrane fuel cell with a pore-scale method. Energy 271:126920

doi: 10.1016/j.energy.2023.126920
[19]

Chen L, Kang Q, Tao W. 2021. Pore-scale numerical study of multiphase reactive transport processes in cathode catalyst layers of proton exchange membrane fuel cells. International Journal of Hydrogen Energy 46:13283−13297

doi: 10.1016/j.ijhydene.2021.01.146
[20]

Guo L, Chen L, Zhang R, Peng M, Tao WQ. 2022. Pore-scale simulation of two-phase flow and oxygen reactive transport in gas diffusion layer of proton exchange membrane fuel cells: effects of nonuniform wettability and porosity. Energy 253:124101

doi: 10.1016/j.energy.2022.124101
[21]

Chen L, Kang Q, He YL, Tao WQ. 2012. Pore-scale simulation of coupled multiple physicochemical thermal processes in micro reactor for hydrogen production using lattice Boltzmann method. International Journal of Hydrogen Energy 37:13943−13957

doi: 10.1016/j.ijhydene.2012.07.050
[22]

Wang Y, Fan Z, Yang C, Weng H, He K, et al. 2025. Pore-scale insights into CO2-EOR performance in depleted oil reservoirs by miscibility–compared with WAG injection. Geoenergy Science and Engineering 250:213839

doi: 10.1016/j.geoen.2025.213839
[23]

Huang J, Peng H, Chen L, Jing D, Liu M. 2025. Multi-component flow and reaction kinetics in photocatalytic microreactors. Physics of Fluids 37:072026

doi: 10.1063/5.0272270
[24]

Song Z, Pan Y, Chen H, Zhang T. 2021. Effects of temperature on the performance of fuel cell hybrid electric vehicles: a review. Applied Energy 302:117572

doi: 10.1016/j.apenergy.2021.117572
[25]

Zhang R, Min T, Chen L, Li H, Yan J, et al. 2022. Pore-scale study of effects of relative humidity on reactive transport processes in catalyst layers in PEMFC. Applied Energy 323:119553

doi: 10.1016/j.apenergy.2022.119553
[26]

Zhang G, Jiao K. 2018. Three-dimensional multi-phase simulation of PEMFC at high current density utilizing Eulerian-Eulerian model and two-fluid model. Energy Conversion and Management 176:409−421

doi: 10.1016/j.enconman.2018.09.031
[27]

Wang Y, Fan Z, Wang Q, Xue Z, Wang D. 2023. Lattice Boltzmann multiphase flow simulations for CO2-enhanced oil recovery using various modes of immiscible CO2 injection. Energy & Fuels 37:12154−12165

doi: 10.1021/acs.energyfuels.3c02071
[28]

Wang Y, Fan J, Yang C, He K, Wang D. 2024. Effects of varying oil/water saturations on miscible and immiscible CO2 flooding in heterogeneous porous media: a lattice Boltzmann method simulation study. Energy & Fuels 38:17770−17780

doi: 10.1021/acs.energyfuels.4c02860
[29]

Shan X, Chen H. 1993. Lattice Boltzmann model for simulating flows with multiple phases and components. Physical Review E 47:1815−1819

doi: 10.1103/physreve.47.1815
[30]

d'Humières D. 2002. Multiple–relaxation–time lattice Boltzmann models in three dimensions. Philosophical Transactions of the Royal Society of London Series A: Mathematical, Physical and Engineering Sciences 360:437−451

doi: 10.1098/rsta.2001.0955
[31]

Yu Z, Fan LS. 2010. Multirelaxation-time interaction-potential-based lattice Boltzmann model for two-phase flow. Physical Review E 82:046708

doi: 10.1103/physreve.82.046708
[32]

Sullivan SP, Sani FM, Johns ML, Gladden LF. 2005. Simulation of packed bed reactors using lattice Boltzmann methods. Chemical Engineering Science 60:3405−3418

doi: 10.1016/j.ces.2005.01.038
[33]

Dawson SP, Chen S, Doolen GD. 1993. Lattice Boltzmann computations for reaction-diffusion equations. The Journal of Chemical Physics 98:1514−1523

doi: 10.1063/1.464316
[34]

Oh H, Lee YI, Lee G, Min K, Yi JS. 2017. Experimental dissection of oxygen transport resistance in the components of a polymer electrolyte membrane fuel cell. Journal of Power Sources 345:67−77

doi: 10.1016/j.jpowsour.2017.01.087
[35]

Liu H, Lv X, Huang H, Li Y, Li D, et al. 2025. Modeling study on anisotropic heat conduction of PEMFC GDLs facilitated by Micro-CT. International Journal of Heat and Mass Transfer 250:127302

doi: 10.1016/j.ijheatmasstransfer.2025.127302
[36]

Chen L, Lin R, Chen X, Hao Z, Diao X, et al. 2020. Microporous layers with different decorative patterns for polymer electrolyte membrane fuel cells. ACS Applied Materials & Interfaces 12:24048−24058

doi: 10.1021/acsami.0c05416
[37]

Patel A, Nishanth S, Patil T. 2025. Advancements in PEM fuel cell technology: evaluating the influence of operating parameters, flow field design, bipolar plate coating, and material factors. Journal of Chemical Technology & Biotechnology 100:1159−1190

doi: 10.1002/jctb.7855
[38]

Zhou C, Guo L, Chen L, Tian X, He T, et al. 2021. Pore-scale modeling of air–water two phase flow and oxygen transport in gas diffusion layer of proton exchange membrane fuel cell. Energies 14:3812

doi: 10.3390/en14133812
[39]

Yin X, Zhang J. 2012. An improved bounce-back scheme for complex boundary conditions in lattice Boltzmann method. Journal of Computational Physics 231:4295−4303

doi: 10.1016/j.jcp.2012.02.014
[40]

Jiao D, Jiao K, Zhong S, Du Q. 2022. Investigations on heat and mass transfer in gas diffusion layers of PEMFC with a gas–liquid-solid coupled model. Applied Energy 316:118996

doi: 10.1016/j.apenergy.2022.118996
[41]

Wang Y, Dai H, Cao H, Zhou S, Gao M, et al. 2024. Performance optimization study on the thermal management system of proton exchange membrane fuel cell based on metal hydride hydrogen storage. Energy 305:132409

doi: 10.1016/j.energy.2024.132409
[42]

Daino MM, Kandlikar SG. 2012. 3D phase-differentiated GDL microstructure generation with binder and PTFE distributions. International Journal of Hydrogen Energy 37:5180−5189

doi: 10.1016/j.ijhydene.2011.12.050
[43]

Zenyuk IV, Parkinson DY, Connolly LG, Weber AZ. 2016. Gas-diffusion-layer structural properties under compression via X-ray tomography. Journal of Power Sources 328:364−376

doi: 10.1016/j.jpowsour.2016.08.020
[44]

Jiang T, Han C, Wang X, Ma Q, Zhu Y, et al. 2025. Optimization of microporous layer perforation design for enhanced liquid water management in PEM fuel cells. International Journal of Heat and Mass Transfer 236:126277

doi: 10.1016/j.ijheatmasstransfer.2024.126277
[45]

Chen W, Jiang F. 2016. Impact of PTFE content and distribution on liquid–gas flow in PEMFC carbon paper gas distribution layer: 3D lattice Boltzmann simulations. International Journal of Hydrogen Energy 41:8550−8562

doi: 10.1016/j.ijhydene.2016.02.159
[46]

Jeon DH, Kim H. 2015. Effect of compression on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell using lattice Boltzmann method. Journal of Power Sources 294:393−405

doi: 10.1016/j.jpowsour.2015.06.080
[47]

Zhang L, Liu S, Wang Z, Li R. 2023. Experimental and simulation analysis of liquid capillary fingering process in the gas diffusion layer. Journal of Power Sources 554:232276

doi: 10.1016/j.jpowsour.2022.232276
[48]

Wei P, Chang G, Fan R, Xu Y, Chen S. 2023. Investigation of output performance and temperature distribution uniformity of PEMFC based on Pt loading gradient design. Applied Energy 352:121962

doi: 10.1016/j.apenergy.2023.121962