[1]

Templin T, Popielarczyk D, Kosecki R. 2018. Application of low-cost fixed-wing UAV for inland lakes shoreline investigation. Pure and Applied Geophysics 175:3263−3283

doi: 10.1007/s00024-017-1707-7
[2]

Wang X, Baldi S, Feng X, Wu C, Xie H, et al. 2023. A fixed-wing UAV formation algorithm based on vector field guidance. IEEE Transactions on Automation Science and Engineering 20(1):179−192

doi: 10.1109/TASE.2022.3144672
[3]

Barczyk M, Lynch AF. 2013. Control-oriented modeling of a helicopter UAV with a Bell-Hiller stabilizer mechanism. Proceedings of American Control Conference, Washington, DC, USA, June 17–19, 2013. IEEE. pp. 313–320 doi: 10.1109/ACC.2013.6579856

[4]

Godbolt B, Lynch AF. 2014. Control-oriented physical input modelling for a helicopter UAV. Journal of Intelligent & Robotic Systems 73:209−217

doi: 10.1007/s10846-013-9933-4
[5]

Chen L, Xiao J, Zheng Y, Alagappan NA, Feroskhan M. 2024. Design, modeling, and control of a coaxial drone. IEEE Transactions on Robotics 40:1650−1663

doi: 10.1109/TRO.2024.3354161
[6]

Denton H, Benedict M, Kang H. 2025. System identification of a thrust-vectoring, coaxial-rotor-based gun-launched micro air vehicle in hovering flight. International Journal of Micro Air Vehicles 17:1−18

doi: 10.1177/17568293251361078
[7]

Guo J, Song R, He S. 2025. Aerial-ground collaborative delivery route planning with UAV energy function and multi-delivery. Journal of Systems Engineering and Electronics 36(2):446−461

doi: 10.23919/JSEE.2025.000048
[8]

Ng M, Vanegas F, Morton K, Sandino J, Gonzalez F. 2022. Design and flight test of an aerial manipulator for applications in GPS-denied environments. 2022 International Conference on Unmanned Aircraft Systems (ICUAS), Dubrovnik, Croatia, June 21–24, 2022. USA: IEEE. pp. 20–29. doi: 10.1109/ICUAS54217.2022.9836060

[9]

Lee SM, Shin M, Son H. 2023. Robust predictor-based control for multirotor UAV with various time delays. IEEE Transactions on Industrial Electronics 70(8):8151−8162

doi: 10.1109/TIE.2022.3224130
[10]

Ding L, Li Y. 2020. Optimal attitude tracking control for an unmanned aerial quadrotor under lumped disturbances. International Journal of Micro Air Vehicles 12:1756829320923563

doi: 10.1177/1756829320923563
[11]

Bauer P, Nagy M. 2024. Flight-data-based high-fidelity system identification of DJI M600 pro hexacopter. Aerospace 11:79

doi: 10.3390/aerospace11010079
[12]

Dai X, Quan Q, Cai KY. 2022. Design automation and optimization methodology for electric multicopter unmanned aerial robots. IEEE Transactions on Automation Science and Engineering 19(3):2354−2368

doi: 10.1109/TASE.2021.3081122
[13]

Lee S, Chae S, Woo SY, Jang J, Kim J. 2021. Effects of rotor–rotor interaction on the wake structure and thrust generation of a quadrotor unmanned aerial vehicle. IEEE Access 9:85995−86016

doi: 10.1109/ACCESS.2021.3088150
[14]

Hachem M, Miquel T, Bronz M, Roos C. 2025. Trajectory optimization for fully actuated hexacopters: enhancing maneuverability and applications. International Journal of Micro Air Vehicles 17:17568293251332313

doi: 10.1177/17568293251332313
[15]

Xu X, Fu H, Zou J, Gui T. 2025. Anti-windup active disturbance rejection control of tiltable-rotors fully actuated hexarotor. International Journal of Advanced Robotic Systems 22(3):17298806251331321

doi: 10.1177/17298806251331321
[16]

Kusmirek S, Socha V, Malich T, Socha L, Hylmar K, et al. 2024. Dynamic flight tracking: designing system for multirotor UAVs with pixhawk autopilot data verification. IEEE Access 12:109806−109821

doi: 10.1109/ACCESS.2024.3441115
[17]

Lim H, Park J, Lee D, Kim HJ. 2012. Build your own quadrotor: open-source projects on unmanned aerial vehicles. IEEE Robotics & Automation Magazine 19(3):33−45

doi: 10.1109/MRA.2012.2205629
[18]

Rezaei A, Vahedi F, Talaeizadeh A, Alasty A. 2023. A practical algorithm for multirotor system design and evaluation. 2023 11th RSI International Conference on Robotics and Mechatronics (ICRoM), Tehran, Iran, December 19–21, 2023. USA: IEEE. pp. 165–170 doi: 10.1109/ICRoM60803.2023.10412467

[19]

Hell M, Bolam RC, Vagapov Y, Anuchin A. 2018. Design of a portable drone for educational purposes. 2018 25th International Workshop on Electric Drives: Optimization in Control of Electric Drives (IWED), Moscow, Russia. USA: IEEE. pp. 1–5 doi: 10.1109/IWED.2018.8321377

[20]

Waliszkiewicz M, Wojtowicz K, Rochala Z, Balestrieri E. 2020. The design and implementation of a custom platform for the experimental tuning of a quadcopter controller. Sensors 20:1940

doi: 10.3390/s20071940
[21]

Arenas Mamani FA, Capira Malcoaccha GB, Blanco Quicaño MA, Prado Gutierrez LG, Echaiz Espinoza GA, et al. 2025. Design, assembly, and tuning of a multipurpose FPV drone: a flexible and low-cost alternative. HardwareX 23:e00672

doi: 10.1016/j.ohx.2025.e00672
[22]

Kotarski D, Piljek P, Pranjić M, Grlj CG, Kasać J. 2021. A modular multirotor unmanned aerial vehicle design approach for development of an engineering education platform. Sensors 21:2737

doi: 10.3390/s21082737
[23]

Brischetto S, Ciano A, Ferro CG. 2016. A multipurpose modular drone with adjustable arms produced via the FDM additive manufacturing process. Curved and Layered Structures 3:202−213

doi: 10.1515/cls-2016-0016
[24]

Esakki B, Mathiyazhagan S, Moses M, Rao KJ, Ganesan S. 2019. Development of 3D-printed floating quadrotor for collection of algae in remote water bodies. Computers and Electronics in Agriculture 164:104891

doi: 10.1016/j.compag.2019.104891
[25]

Moral K, Ayran B, Altug E. 2024. Design and control of a modular multi-drone system with vertical assemble capability. International Journal of Dynamics and Control 12:2991−3004

doi: 10.1007/s40435-024-01404-9
[26]

Falanga D, Kleber K, Mintchev S, Floreano D, Scaramuzza D. 2019. The foldable drone: a morphing quadrotor that can squeeze and fly. IEEE Robotics and Automation Letters 4(2):209−216

doi: 10.1109/LRA.2018.2885575
[27]

Tuna T, Ertug Ovur S, Gokbel E, Kumbasar T. 2020. Design and development of FOLLY: a self-foldable and self-deployable quadcopter. Aerospace Science and Technology 100:105807

doi: 10.1016/j.ast.2020.105807
[28]

Dilaveroğlu L, Özcan O. 2020. MiniCoRe: a miniature, foldable, collision resilient quadcopter. 2020 3rd IEEE International Conference on Soft Robotics (RoboSoft), May 15 – July 15, 2020, New Haven, CT, USA. USA: IEEE. pp. 176–181 doi: 10.1109/RoboSoft48309.2020.9115993

[29]

Toleos LR, Dela Luna NJAB, Manuel MCE, Chua JMR, Sangalang EMA, et al. 2020. Feasibility study for fused deposition modeling (FDM) 3D-printed propellers for unmanned aerial vehicles. International Journal of Mechanical Engineering and Robotics Research 9(4):548−558

doi: 10.18178/ijmerr.9.4.548-558
[30]

Andries V, Zaharia SM. 2025. Generative design, simulation, and 3D printing of the quadcopter drone frame. Applied Sciences 15:9647

doi: 10.3390/app15179647
[31]

Azarov AV, Antonov FK, Golubev MV, Khaziev AR, Ushanov SA. 2019. Composite 3D printing for the small size unmanned aerial vehicle structure. Composites Part B: Engineering 169:157−163

doi: 10.1016/j.compositesb.2019.03.073
[32]

Patel R, Jani S, Joshi A. 2023. Review on multi-objective optimization of FDM process parameters for composite materials. International Journal on Interactive Design and Manufacturing 17:2115−2125

doi: 10.1007/s12008-022-01111-9
[33]

Li Q, Kucukkoc I, Zhang D. 2017. Production planning in additive manufacturing and 3D printing. Computers & Operations Research 83:157−172

doi: 10.1016/j.cor.2017.01.013
[34]

Oh Y, Witherell P, Lu Y, Sprock T. 2020. Nesting and scheduling problems for additive manufacturing: a taxonomy and review. Additive Manufacturing 36:101492

doi: 10.1016/j.addma.2020.101492
[35]

De Antón J, Villafáñez F, Poza D, López-Paredes A. 2023. A framework for production planning in additive manufacturing. International Journal of Production Research 61:8674−8691

doi: 10.1080/00207543.2022.2160026
[36]

Kotarski D, Scuric A, Krznar N, Sancic T. 2026. Design and development of a modular, low-cost 3D printed multirotor UAV airframe. In Advances in Transportation and Design Engineering. ed. Stjepandić J. Amsterdam: IOS Press. pp. 707−717 doi: 10.3233/ATDE260095

[37]

Hattenberger G, Bronz M, Condomines JP. 2023. Evaluation of drag coefficient for a quadrotor model. International Journal of Micro Air Vehicles 15:17568293221148378

doi: 10.1177/17568293221148378
[38]

Kotarski D, Kasać J. 2018. Generalized control allocation scheme for multirotor type of UAVs. In Drones – Applications. ed. Dekoulis G. Rijeka: InTech. doi: 10.5772/intechopen.73006

[39]

Kotarski D, Piljek P, Kasać J. 2023. Heavy-lift multirotor unmanned aerial vehicles characterization and sizing. IEEE Access 11:94290−94305

doi: 10.1109/ACCESS.2023.3310820
[40]

Šančić T, Brčić M, Kotarski D, Łukaszewicz A. 2023. Experimental characterization of composite-printed materials for the production of multirotor UAV airframe parts. Materials 16:5060

doi: 10.3390/ma16145060
[41]

Krznar N, Sancic T, Scuric A, Piljek P, Pranjic M, et al. 2024. Conventional versus reinforced additive manufacturing in unmanned aerial vehicle design. 2024 5th International Conference in Electronic Engineering, Information Technology & Education (EEITE), Chania, Greece, May 29–31, 2024. USA: IEEE. pp. 1–5 doi: 10.1109/EEITE61750.2024.10654436