[1]

Zhang Z, Pang H, Georgiadis A, Cecati C. 2019. Wireless power transfer—an overview. IEEE Transactions on Industrial Electronics 66:1044−1058

doi: 10.1109/TIE.2018.2835378
[2]

Lu W, Zhao J, Chen X, Fan Q, Zhang C. 2023. Bilateral control strategy based on LCL-S compensation network wireless charging system without communication. International Journal of Automotive Technology 24:171−178

doi: 10.1007/s12239-023-0015-8
[3]

Spagnuolo G. 2025. Wireless power transfer for E-mobility: fundamentals and design guidelines for wireless charging of electric vehicles [book news]. IEEE Industrial Electronics Magazine 19:125−126

doi: 10.1109/MIE.2025.3536883
[4]

Nath S. 2024. Vehicle-to-vehicle wireless charging with decoupled primary side control. Electrical Engineering 106:7343−7352

doi: 10.1007/s00202-024-02430-8
[5]

Chen R, Gao F, Zhou D, Xia Y, Zou J, et al. 2025. Low-voltage and high-current wireless power transfer systems for autonomous underwater vehicles. IEEE Transactions on Transportation Electrification 11:5841−5854

doi: 10.1109/TTE.2024.3491803
[6]

Yan Z, Peng B, Wang J, Liang B, Zhang K, et al. 2025. An underwater wireless power transfer system with improved misalignment tolerance. IEEE Journal of Emerging and Selected Topics in Power Electronics 13:4369−4376

doi: 10.1109/JESTPE.2025.3541289
[7]

Lv X, Dai X, Yu F, Li X, Wang H, et al. 2025. A high misalignment tolerance SCC-WPT system with relay single capacitive coupler for UAV wireless charging applications. IEEE Transactions on Power Electronics 40:10372−10377

doi: 10.1109/TPEL.2025.3554676
[8]

Ding S, Koulouridis S, Pichon L. 2020. Miniaturized implantable power transmission system for biomedical wireless applications. Wireless Power Transfer 7:1−9

doi: 10.1017/wpt.2019.16
[9]

Kod M, Zhou J, Huang Y, Hussein M, Sohrab AP, et al. 2021. An approach to improve the misalignment and wireless power transfer into biomedical implants using meandered wearable loop antenna. Wireless Power Transfer 8:6621899

doi: 10.1155/2021/6621899
[10]

Zhang C, Lu W, Zhao J, Wu X, Chen H, et al. 2023. A novel asymmetric magnetic coupler applied to multiple-receiver wireless charging system for automated guided vehicles. IEEE Transactions on Power Electronics 38:14761−14775

doi: 10.1109/TPEL.2023.3307461
[11]

Guo D, Su Y, Yin H, Lan H, Li D. 2024. Self-adaptive resonance technology for wireless power transfer systems to eliminate impedance mismatches. IEEE Transactions on Power Electronics 39:10482−10495

doi: 10.1109/TPEL.2023.3265422
[12]

Rong C, Zhang B, Jiang Y, Shu X, Wei Z. 2022. A misalignment-tolerant fractional-order wireless charging system with constant current or voltage output. IEEE Transactions on Power Electronics 37:11356−11368

doi: 10.1109/TPEL.2022.3164069
[13]

Yenil V. 2024. A wireless power transfer system with high misalignment tolerance based on dual side variable in ductor control. IEEE Access 12:134937−134947

doi: 10.1109/ACCESS.2024.3462849
[14]

Zhu G, Dong J, Yu G, Shi W, Riekerk C, et al. 2024. Optimal multivariable control for wide output regulation and full-range efficiency optimization in LCC–LCC compensated wireless power transfer systems. IEEE Transactions on Power Electronics 39:11834−11848

doi: 10.1109/TPEL.2024.3414157
[15]

Rong C, Chang J, Liu Y, Ling Z, Xu Y, et al. 2025. A novel coil array compensation structure design with high-misalignment tolerance for UAV-enable WPT system. Electrical Engineering 107:2569−2579

doi: 10.1007/s00202-024-02660-w
[16]

Mao X, Lin J, Su T, Zhang Y. 2024. Automatic guided vehicle wireless charging with dual receiving coils for misalignment tolerance. IEEE Transactions on Circuits and Systems II: Express Briefs 71:336−339

doi: 10.1109/TCSII.2023.3304661
[17]

Yao Y, Gao S, Mai J, Liu X, Zhang X, et al. 2022. A novel misalignment tolerant magnetic coupler for electric vehicle wireless charging. IEEE Journal of Emerging and Selected Topics in Industrial Electronics 3:219−229

doi: 10.1109/JESTIE.2021.3051550
[18]

Zhao L, Thrimawithana DJ, Madawala UK. 2017. Hybrid bidirectional wireless EV charging system tolerant to pad misalignment. IEEE Transactions on Industrial Electronics 64:7079−7086

doi: 10.1109/TIE.2017.2686301
[19]

Zhang Y, Wei G, Zhang J, Hao L, Cheng L. 2025. A hybrid topology relay based wireless power transfer system with mutual inductance enhancement and high misalignment tolerance. IEEE Transactions on Power Electronics 40:7640−7645

doi: 10.1109/TPEL.2025.3539286
[20]

Wen H, Li J, Yang J, Wang P, Zhang K, et al. 2024. Hybrid topology with reconfigurable rectifier for enable CC and CV output characteristics in wireless power transfer systems. Journal of Electromagnetic Engineering and Science 24:285−293

doi: 10.26866/jees.2024.3.r.229
[21]

Yang B, Lu Y, Peng Y, He S, Chen Y, et al. 2022. Analysis and design of a T/S compensated IPT system for AGV maintaining stable output current versus air gap and load variations. IEEE Transactions on Power Electronics 37:6217−6228

doi: 10.1109/TPEL.2021.3135053
[22]

Rong C, Chang J, Lu Q, Liu W, Zhao Y, et al. 2024. Coupling mechanism optimization to improve misalignment tolerance in UAV wireless charging systems. Journal of Power Electronics 24:1490−1504

doi: 10.1007/s43236-024-00839-9
[23]

Rao P, Liu C, Zhou M, Zhuang Y, Zhang Y. 2025. A coil with all-plane high misalignment tolerance for wireless power transfer. International Journal of Circuit Theory and Applications 53:5180−5185

doi: 10.1002/cta.4437
[24]

Shen Z, Liu C, Tang H, Chen X, Zhang Y. 2024. A misalignment-insensitive hybrid reconfigurable wireless charging system for constant-voltage and constant-current outputs based on a novel bipolar coil symmetrical to two perpendicular directions. IEEE Transactions on Power Electronics 39:16904−16915

doi: 10.1109/TPEL.2024.3443140
[25]

Li Z, Zhang Y, Yu SS, Zhang G. 2025. A hybrid wireless power transfer system with high misalignment tolerance using diagonal crossed solenoid magnetic coupler. Chinese Journal of Electrical Engineering 11:138−150

doi: 10.23919/CJEE.2025.000099