| [1] |
Cahuas L, Muensterman DJ, Kim-Fu ML, Reardon PN, Titaley IA, et al. 2022. Paints: a source of volatile PFAS in air─potential implications for inhalation exposure. |
| [2] |
Kim SW, Song WY, Waldman WR, Rillig MC, Kim TY. 2024. Toxicity of aged paint particles to soil ecosystems: insights from Caenorhabditis elegans. |
| [3] |
Salihoglu G, Salihoglu NK. 2016. A review on paint sludge from automotive industries: generation, characteristics and management. |
| [4] |
Tanzer-Gruener R, Rajan PE, Dugan LD, Bier ME, Robinson AL, et al. 2022. Watching paint dry: organic vapor emissions from architectural coatings and their impact on secondary organic aerosol formation. |
| [5] |
Jiménez-López AM, Hincapié-Llanos GA. 2022. Identification of factors affecting the reduction of VOC emissions in the paint industry: systematic literature review - SLR. |
| [6] |
Uçaroğlu S, Gümrah BG. 2024. Management of water-based paint sludge originating from the automotive industry via composting. |
| [7] |
Zhang X, Tang B, Cao X, Li J, Zhu H. 2023. Study on the release characteristics of volatile organic compounds from different aged asphalt. |
| [8] |
Liu Z, Yan Y, Lv T, Huang Z, Liu T, et al. 2022. Comprehensive understanding the emission characteristics and kinetics of VOCs from automotive waste paint sludge in a environmental test chamber. |
| [9] |
Liu Z, Huang Z, Yan Y, Liu T, Lv T, et al. 2022. Characterizing the emission behaviors of cumulative VOCs from automotive solvent-based paint sludge. |
| [10] |
Lee YK, Kim HJ. 2012. The effect of temperature on VOCs and carbonyl compounds emission from wooden flooring by thermal extractor test method. |
| [11] |
Wang H, Zhang R, He X, Sun L, Yu X, et al. 2025. Determination of VOC transport parameters in artificial skin and the influence of temperature on permeability. |
| [12] |
Xiong J, Wei W, Huang S, Zhang Y. 2013. Association between the emission rate and temperature for chemical pollutants in building materials: general correlation and understanding. |
| [13] |
Lin CC, Yu KP, Zhao P, Whei-May Lee G. 2009. Evaluation of impact factors on VOC emissions and concentrations from wooden flooring based on chamber tests. |
| [14] |
Huang S, Xiong J, Zhang Y. 2015. Impact of temperature on the ratio of initial emittable concentration to total concentration for formaldehyde in building materials: theoretical correlation and validation. |
| [15] |
Abu Bakar NF, Muhd Sidek MN, Suharman SM, Abd Rahman N. 2022. Characterization and evaluation of dried automotive paint sludge as cement-based composite. |
| [16] |
Ruffino B, Campo G, Idris SS, Salihoğlu G, Zanetti M. 2023. Automotive paint sludge: a review of pretreatments and recovery options. |
| [17] |
Podgornik R. 2000. Book review: molecular thermodynamics. |
| [18] |
Xiong J, Zhang Y. 2010. Impact of temperature on the initial emittable concentration of formaldehyde in building materials: experimental observation: Impact of temperature on the initial emittable concentration of formaldehyde. |
| [19] |
Haghighat F, De Bellis L. 1998. Material emission rates: literature review, and the impact of indoor air temperature and relative humidity. |
| [20] |
Liu Z, Sun Y, Guo W, Li Q. 2021. Experimental study of the characteristics of gas-injection barrier in two-dimensional porous media. |
| [21] |
Deng Q, Yang X, Zhang J. 2009. Study on a new correlation between diffusion coefficient and temperature in porous building materials. |
| [22] |
Wang Y, Wang H, Tan Y, Liu J, Wang K, et al. 2021. Measurement of the key parameters of VOC emissions from wooden furniture, and the impact of temperature. |
| [23] |
Nakamichi S, Kawaguchi Y, Fukuda H, Enami S, Hashimoto S, et al. 2006. Buffer-gas pressure broadening for the (3 00 1)III ← (0 0 0) band of CO2 measured with continuous-wave cavity ring-down spectroscopy. |
| [24] |
van der Wal JF, Hoogeveen AW, Wouda P. 1997. The influence of temperature on the emission of volatile organic compounds from PVC flooring, carpet, and paint. |
| [25] |
Avci H, Ghorbanpoor H, Topcu IB, Nurbas M. 2017. Investigation and recycling of paint sludge with cement and lime for producing lightweight construction mortar. |