Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping

Laurenz Köhne; Pia Elisabeth Lorenz; Marie‐Luise Schlieker; Chantal Treinen; Marius Henkel; Laurenz Köhne; Pia Elisabeth Lorenz; Marie‐Luise Schlieker; Chantal Treinen; Marius Henkel

doi:10.1002/elsc.70073

2026 Volume 26

Article Contents

Next Previous

TECHNICAL REPORT Open Access

Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping

More Information

Published online: 25 March 2026
Engineering in Life Sciences 26(3), Article number: 10.1002/elsc.70073 (2026) | Cite this article

Rights and permissions
Copyright: © 2026 by the author(s). Exclusive Licensee Maximum Academic Press, Fayetteville, GA. This article is an open access article distributed under Creative Commons Attribution License (CC BY 4.0), visit https://creativecommons.org/licenses/by/4.0/.

About this article

Cite this article

Laurenz Köhne, Pia Elisabeth Lorenz, Marie‐Luise Schlieker, Chantal Treinen, Marius Henkel. 2026. Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping. Engineering in Life Sciences. 26:73 doi: 10.1002/elsc.70073

Laurenz Köhne, Pia Elisabeth Lorenz, Marie‐Luise Schlieker, Chantal Treinen, Marius Henkel. 2026. Design and Characterization of a 3D‐Printable Membrane Aeration Module for Small‐Scale Bioprocess Prototyping. Engineering in Life Sciences. 26:73 doi: 10.1002/elsc.70073

Download PDF

Article Metrics

Article views(133) PDF downloads(336)