Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability

Carina Zierberg; Marcus Leppkes; Uta Bergstedt; Mathias Ulbricht; Heyko Jürgen Schultz; Carina Zierberg; Marcus Leppkes; Uta Bergstedt; Mathias Ulbricht; Heyko Jürgen Schultz

doi:10.1002/elsc.70076

2026 Volume 26

Article Contents

Next Previous

RESEARCH ARTICLE Open Access

Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability

More Information

Published online: 30 March 2026
Engineering in Life Sciences 26(4), Article number: 10.1002/elsc.70076 (2026) | Cite this article

Rights and permissions
Copyright: © 2026 by the author(s). Exclusive Licensee Maximum Academic Press, Fayetteville, GA. This article is an open access article distributed under Creative Commons Attribution License (CC BY 4.0), visit https://creativecommons.org/licenses/by/4.0/.

About this article

Cite this article

Carina Zierberg, Marcus Leppkes, Uta Bergstedt, Mathias Ulbricht, Heyko Jürgen Schultz. 2026. Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability. Engineering in Life Sciences. 26:76 doi: 10.1002/elsc.70076

Carina Zierberg, Marcus Leppkes, Uta Bergstedt, Mathias Ulbricht, Heyko Jürgen Schultz. 2026. Evaluation of 3D‐Printed Resin Materials for Use in Microbial Bioprocess Applications: Suitability and Autoclavability. Engineering in Life Sciences. 26:76 doi: 10.1002/elsc.70076

Download PDF

Article Metrics

Article views(94) PDF downloads(339)